Potentiometer
Analog Voltage 1.25 to 3.75V | ||
Three screw terminals |
Light Sensor
Analog voltage 1.25 to 3.75V from light to dark | ||
Three screw terminals |
Temperature Sensor
10mV per Kelvin (25C=2.93V) Accuracy +/- 1K at 25C | ||
Three screw terminals |
Accurate Temperature Sensor Module
Board with LCD display and temperature probe | ||
Presettable high and low temperature set points (requires switches) | ||
Output pin goes high when temp goes above or below preset | ||
16 solder pads. Requires 1.5V |
Tilt Sensor Board
Mercury Tilt Switch | ||
Three screw terminals |
Reed Switch Board
Reed switch closes if magnet is in proximity (eg if a door is closed) | ||
Three screw terminals |
Four Switch Input Board
Four push buttons on a board | ||
Six screw terminals |
Mains Voltage Input Board
Detects if a mains voltage is on or off. Opto Isolated | ||
Three screw terminal connections and two screw terminals for active/neutral. |
Voltage Input Board
Detects difference between two input voltages. Adjustable gain (please specify eg 0-10V) | ||
Three screw terminal connections and two screw terminals for input voltages |
Current Input Board
Detects current flowing in a circuit. Adjustable gain (please specify eg 0-1A) | ||
Three screw terminal connections and two screw terminals for circuit to test |
Opto Isolated AC or DC input board
Detects if an AC or DC voltage is present. Adjustable range up to 240V (please specify) | ||
Three screw terminal connections and two screw terminals for input voltage |
Photo Interruptor Board
Detects if an object passes through a 3mm slot | ||
Three screw terminals |
Hall Effect Board
Detects a magnetic field - 2.5V increases or decreases with a north or south pole | ||
Four screw terminals |
Infra Red Proximity Board
Detects objects up to 1 metre away. Voltage proportional to distance. | ||
Two detectors on one board | ||
Four screw terminals |