Alphabetized Error Message List


Menu
What is your (A-B) Error Message?
What is your (C) Error Message?
What is your (D-E) Error Message?
What is your (F-H) Error Message?
What is your (I) Error Message?
What is your (M-N) Error Message?
What is your (O-R) Error Message?
What is your (S) Error Message?
What is your (T) Error Message?
What is your (U-V) Error Message?
What is your (W) Error Message?
What is your (X-Z) Error Message?
What is the (Special Characters) Error Message?

What is your (A-B) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76B72SASJ.ASP

Error: ATI All-In-Wonder Pro Is Not Detected Correctly
Error: A .WAV driver is not installed
Error: A serious error has occurred in Microsoft Backup...(when restoring)
Error: Access code is invalid. (when editing the registry)
Error: Access Pack Error. Could not initialize the Mini VxD, load aborted
Error: APPEND does not work
Error: Bad command or filename (starting DOS-program at the prompt)
Error: The specified path is invalid (running an application)

What is your (C) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76B72SK7T.ASP

Error: Cannot copy file: File system error (1026)
Error: Error Copying File: Cannot copy file...(due to temporary folder full)
Error: Error Copying File: Cannot copy file...(due to temporary folder full)
Error: Error Copying File: Cannot copy file...(due to temporary folder full)
Cannot copy file from diskette due to physical diskette damage
Cannot copy file from diskette due to not enough space on destination disk
Cannot copy file from diskette due to wrong insertion of diskette in drive
Cannot copy file from diskette due to hard drive or diskette damage
Cannot copy file from diskette due to hard drive or diskette virus
Cannot copy file from diskette due to unknown cause
Error: Comdlg32.dll File Cannot Start
Error: Cannot find a device file... (when installing Close-Up)
Error: Cannot find a device file...Vnetsup.vxd
Error: Cannot find file <filename>
Error: Cannot find the working folder for this program
Error: Cannot load a device file specified in SYSTEM.INI...NWREDIR.VXD
Error: Cannot load device that is specified in SYSTEM.INI (NetWare)
Error: Cannot make directory entry (when using COPY)
Error: Cannot open file *.INF (during Setup)
Error: Cannot read Setup (.cab) files
Error: Could not enumerate print servers
Error: Could not start print job (when sending FAX)

What is your (D-E) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76B72TAQ6.ASP

Error: Data or no disk loaded when trying to play an audio CD
Error: Device is not responding (when running Setup)
Error: Dial-Up Networking could not negotiate a compatible set of protocols
Error: Disk initialization error (when creating Startup diskette)
Error: Drive C cannot be compressed
Error: Drive X is in use by a local drive (when mapping a drive)
Error: Error 171 could not access schedule information
Error: Error 234: Additional data is available (when using NET VIEW)
Error Message: Error 745: An Essential File Is Missing
Error: Error Deleting File...(when deleting a file in Explorer)
Error Message: Error Locating Object Handler
Error: Error loading C:\MOUSE\MOUSE.DRV
Error: Error Message: You Cannot View The List of Users at This Time
Error: Error Renaming File. Cannot rename C:\filename...(due to wrong pathname)
Error: Error renaming file...(when renaming directory on NT server)
Error: Error Starting Program. The TAPI32.DLL...(when opening a program)
Error: Error starting program. There is not enough memory
Error: Error SU-0011
Error: Error SU-0013
Error: Error SU-0167
Error: Error SU-0358
Error: Error trying to add trustee (when using GRANT)
Error: Error trying to assign trustee
Error: Error when editing color palette in Paint
Error: Error when printing on Avery LabelPro
Error: Error when running UNDELETE at DOS prompt
Error: Error writing to LPTx...after upgrading from Windows 3.1x
Error: Error.TNT:20074: can`t use (when running DOS-based CAD program)
Error: Explorer: This program has performed an illegal op... (when opening icon)
Err Msg: Decode: Could Not Decode This Setup (.cab) File...

What is your (F-H) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76B72TLRL.ASP

Error: Fail to create cover page. Unable to arrange to send FAX
Error: Fatal Exception Error using Iomega IDE Zip Drives
Error: Files required to manage...missing files will be restored
Error: General Failure in Microsoft Transport (sending multi-recipient fax)
Error: Generic install error. Invalid GenInstall INF file
Error: Host disconnected

Error Message When You Open a New Folder
http://support.microsoft.com/support/kb/articles/Q259/0/96.ASP

What is your (I) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76B72TUJA.ASP

Error: In order to upgrade this version of Windows...run Setup in MS-DOS mode
Error: Incorrect DOS version (during setup)
Error: Incorrect DOS version error when restoring a backup
Error: Insufficient disk space (during Setup)
Error: Insufficient memory to initialize Windows....Quit one or more memory-res
Error: Insufficient memory to run Windows (when booting OSR2)
Error: Invalid fonts directory
Error: Invalid VxD dynamic link call from NWREDIR(04) +000000B9 to device 0487

What is your (M-N) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76B72UA63.ASP

Error: M0026: Failed to find controller -- Controller not present
Error: MAPISP32 fault (starting Microsoft Exchange)
Error: Microsoft Backup unable to read from the disk...try again
Error: Microsoft Plus! is not installed
Error: MMSYSTEM262 There is a problem with your media device
Error: MMSYSTEM266 The device could not be loaded...installed correctly
Error: MMSYSTEM281 This file could not be played...supports this type of file
Error: MPREXE Not Responding
Error: No network provider accepted... (when using UNC at prompt)
Error: No response (timeout)...(in HyperTerminal using Kermit)
Error: Not enough extended memory available to run Windows. Quit ... to continue
Error: Not enough memory or resources (when opening .bmp file in Paint)
Error: Not enough memory to render page
Error: Not enough storage to complete this operation (when opening Printers)

What is your (O-R) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76E50J5CQ.ASP

Error: One or more of your disk drives...surface analysis on these drives
Error: Out of memory (when starting a program)
Error: Out of memory displayed printing to HP DeskJet printer
Error: Registry file was not found
Error: Registry is damaged
Error: RUNDLL32.GPF (when changing display adapter)

What is your (S) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76B72UNI2.ASP

Error: ScanDisk cannot check this drive...restart ScanDisk
Error: ScanDisk cannot examine drive <letter>:... version 5.0 or later
Error: SDMErr(80000003): Registry access failed
Error: Security features are not supported...(when sending fax)
Error: Select File Name. The destination does not support long file names
Error: Setup cannot continue on this system configuration
Error: Setup could not back up your system files
Error: Setup Error 907 with Microsoft Plus
Error: Setup Error G1 (when installing from DOS)
Error: Software has been installed which interferes...the display mini-driver
Error: Sound Recorder cannot record or play back
Error: SPOOL32 caused a general protection fault in module ADOBEPS.DRV
Error: Standard Mode: Fault in MS-DOS Extender (during setup)
Error: SUI0014 Error When Detection Reaches 100 Percent Complete
Error: Suwin caused a GPF in 256_1280.drv at 0002:0D7B
Error: Swap file on host drive displays error message during uncompress
Error: SYSTEM ERROR Network Error on Drive X
Setup Creates a Folder Named !$!$!$!$.$!$
http://support.microsoft.com/support/kb/articles/q132/6/02.asp

What is your (T) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76B72V619.ASP

Error: The application was unable to allocate the necessary...a window
Error: The Briefcase cannot be opened...(when sending file to Briefcase)
Error: The command you specified could not be carried out (when opening Inbox)
Error: The compression driver cannot be set (when booting OSR2)
Error: The device has been disabled in hardware...(Code 29)
Error: The drive or network connection the shortcut refers to is unavailable
Error: The extension .<ext> is already in use by file type <Name>
Error: The following error occurred while loading device VNETSUP: Error 6102
Error: The Font File May Be Damaged
Error: The path X is invalid
Error: The specified network server does not exist (when using shared fax)
Error: The specified network server is not...(when accessing shared fax)
Error: The system cannot find the file...(when using XCOPY)
Error: The TAPI configuration has changed...(when trying to connect)
Error: The TAPI configuration has changed...session is no longer valid
Error: There is not enough memory to load the Registry
Error: There is not enough memory to run ScanDisk (when running Setup)
Error: There is still unsent mail in the Outbox (when quitting Exchange)
Error: There was an error running SCANDISK...continue starting Windows
Error: This application attempted to execute an invalid instruction
Error: This application cannot be restored and will be terminated
Error: This application cannot be restored...be terminated (running DOS-program)
Error: This application has performed an illegal operation...2067:0127
Error: This printer cannot be installed now because its driver...then try again
Error: This program does not run under Windows (starting DOS program)
Error: This program...Fatal Exception OD at 00457:000040B1
Error: This Setup is not intended for this version of Windows
Error: This Setup is not intended for this version...(installing Excel 5.0)
Error: This version of ScanDisk will only work with MS-DOS 6.0 or later
Error: TrueType rasterizer is not enabled

What is your (U-V) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76B72W3DV.ASP
MS-DOS Error Msg: Unable to Control A20 Line
http://support.microsoft.com/support/kb/articles/q73/7/13.asp
Error: Unable to create <New Folder>. Make sure...disk is not full or read-only
Error: Unable to create a shortcut here
Error: Unable to install the <fontname> (TrueType)...font file may be damaged
Error: Unidrv.dll is already in use
Error: Unsupported Data Configuration
Error: Verifying <xxx.xx>M Invalid media...Format terminated
Error: Video not available, cannot find vids:cvid decompressor
Error: VMerror OFFENDING COMMAND: makepattern STACK using PostScript printer
Error Message: VFAT Device Initialization Failed
http://support.microsoft.com/support/kb/ARTICLES/Q139/0/63.asp

What is your (W) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76B72WCOH.ASP

Error: Warning: This operation has been canceled by the system
Error: Windows cannot defragment this drive...(incorrect version)
Error: Windows cannot determine if it can remove this device (when undocking)
Error: Windows cannot format this disk because it is write-protected
Error: Windows could not combine VxDs (when rebooting after Setup)
Error: Windows did not finish loading on the previous attempt
Error: Windows did not finish loading on the previous attempt. A clean start
Error: Windows files are installed on host drive ... uncompress drive Y
Error: Windows has disabled direct disk access to protect your long filenames
Error: Windows has disabled direct disk access when running BACKUP
Error: Windows protection error...restart your computer
Error: Windows was not properly shut down...run ScanDisk on these drives
Error: WordPad caused a... (when sending via MS FAX in word processor)
Error: Wrong DOS version (when running Unformat)

What is your (X-Z) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76E50IZK4.ASP

Error: You are currently using NetWare servers which will be inaccessible...if
Error: You are using a disk utility designed for an earlier version of MS-DOS
Error: You are using other hardware... (when using Hardware Wizard)
Error: You cannot run this version of Windows on DOS 6.x or earlier
Error: You cannot view the list of users at this time
Error: You must enter a valid separator page
Error: Your network adapter HP27252 is not configured correctly
Error: You Have Restored a Good Registry...

What is the (Special Characters) Error Message? 
http://support.microsoft.com/support/serviceware/windows/Win95/76B72WXB9.ASP

Error: (TCP/IP) Lost Connection
Error: 386MAX ERROR: VGASWAP VDD Control Hook Recursion
Error: <filename>: This filename is not valid
Error: <path>:\ is not accessible. The specified network ... is not correct
Error: <program name> caused an exception <number> in module
Error: \\<computername>\<Sharedresourcename>. The network cannot be found
XMS Cache Problem. Registry services may be inoperative this session.


  • Back To The Top    • Back To Home