Displays or changes file attributes.
ATTRIB [+R | -R] [+A | -A] [+S | -S] [+H | -H] [[drive:][path]filename] [/S]
+ Sets an attribute.
- Clears an attribute.
R Read-only file attribute.
A Archive file attribute.
S System file attribute.
H Hidden file attribute.
/S Processes files in all directories in the specified path.
Checks a disk and displays a status report.
CHKDSK [drive:][[path]filename] [/F] [/V]
[drive:][path] Specifies the drive and directory to check.
filename Specifies the file(s) to check for fragmentation.
/F Fixes errors on the disk.
/V Displays the full path and name of every file on the disk.
Type CHKDSK without parameters to check the current disk.
Instead of using CHKDSK, try using SCANDISK. SCANDISK can reliably detect
and fix a much wider range of disk problems.
Waits for the user to choose one of a set of choices.
CHOICE [/C[:]choices] [/N] [/S] [/T[:]c,nn] [text]
/C[:]choices Specifies allowable keys. Default is YN
/N Do not display choices and ? at end of prompt string.
/S Treat choice keys as case sensitive.
/T[:]c,nn Default choice to c after nn seconds
text Prompt string to display
ERRORLEVEL is set to offset of key user presses in choices.
Starts a new copy of the Windows Command Interpreter.
COMMAND [[drive:]path] [device] [/E:nnnnn] [/L:nnnn] [/U:nnn] [/P] [/MSG]
[/LOW] [/Y [/[C|K] command]]
[drive:]path Specifies the directory containing COMMAND.COM.
device Specifies the device to use for command input and output.
/E:nnnnn Sets the initial environment size to nnnnn bytes.
(nnnnn should be between 256 and 32,768).
/L:nnnn Specifies internal buffers length (requires /P as well).
(nnnn should be between 128 and 1,024).
/U:nnn Specifies the input buffer length (requires /P as well).
(nnn should be between 128 and 255).
/P Makes the new Command Interpreter permanent (can't exit).
/MSG Stores all error messages in memory (requires /P as well).
/LOW Forces COMMAND to keep its resident data in low memory.
/Y Steps through the batch program specified by /C or /K.
/C command Executes the specified command and returns.
/K command Executes the specified command and continues running.
Runs Debug, a program testing and editing tool.
DEBUG [[drive:][path]filename [testfile-parameters]]
[drive:][path]filename Specifies the file you want to test.
testfile-parameters Specifies command-line information required by
the file you want to test.
After Debug starts, type ? to display a list of debugging commands.
Deletes a directory and all the subdirectories and files in it.
To delete one or more files and directories:
DELTREE [/Y] [drive:]path [[drive:]path[...]]
/Y Suppresses prompting to confirm you want to delete
the subdirectory.
[drive:]path Specifies the name of the directory you want to delete.
Note: Use DELTREE cautiously. Every file and subdirectory within the
specified directory will be deleted.
Copies the contents of one floppy disk to another.
DISKCOPY [drive1: [drive2:]] [/1] [/V] [/M]
/1 Copies only the first side of the disk.
/V Verifies that the information is copied correctly.
/M Force multi-pass copy using memory only.
The two floppy disks must be the same type.
You may specify the same drive for drive1 and drive2.
Edits command lines, recalls command lines, and creates macros
DOSKEY [/switch ...] [macroname=[text]]
/BUFSIZE:size Sets size of macro and command buffer (default:512)
/ECHO:on|off Enables/disables echo of macro expansions (default:on)
/FILE:file Specifies file containing a list of macros
/HISTORY Displays all commands stored in memory
/INSERT Inserts new characters into line when typing
/KEYSIZE:size Sets size of keyboard type-ahead buffer (default:15)
/LINE:size Sets maximum size of line edit buffer (default:128)
/MACROS Displays all DOSKey macros
/OVERSTRIKE Overwrites new characters onto line when typing (default)
/REINSTALL Installs a new copy of DOSKey
macroname Specifies a name for a macro you create
text Specifies commands you want to assign to the macro
UP,DOWN arrows recall commands
Esc clears current command
F7 displays command history
Alt+F7 clears command history
[chars]F8 searches for command beginning with [chars]
---More---
F9 selects a command by number
Alt+F10 clears macro definitions
The following are special codes you can use in DOSKey macro definitions:
$T Command separator: allows multiple commands in a macro
$1-$9 Batch parameters: equivalent to %1-%9 in batch programs
$* Symbol replaced by everything following macro name on the command line
MS-DOS Editor Version 2.0.026 Copyright (c) Microsoft Corp 1995.
EDIT [/B] [/H] [/R] [/S] [/<nnn>] [/?] [file(s)]
/B - Forces monochrome mode.
/H - Displays the maximum number of lines possible for your hardware.
/R - Load file(s) in read-only mode.
/S - Forces the use of short filenames.
/<nnn> - Load binary file(s), wrapping lines to <nnn> characters wide.
/? - Displays this help screen.
[file] - Specifies initial files(s) to load. Wildcards and multiple
filespecs can be given.
Microsoft (R) Diamond Extraction Tool - Version (16) 1.00.0530 (04/3/95)
Copyright (c) Microsoft Corp 1994-1995. All rights reserved.
EXTRACT [/Y] [/A] [/D | /E] [/L dir] cabinet [filename ...]
EXTRACT [/Y] source [newname]
EXTRACT [/Y] /C source destination
cabinet - Cabinet file (contains two or more files).
filename - Name of the file to extract from the cabinet.
Wild cards and multiple filenames (separated by
blanks) may be used.
source - Compressed file (a cabinet with only one file).
newname - New filename to give the extracted file.
If not supplied, the original name is used.
/A Process ALL cabinets. Follows cabinet chain
starting in first cabinet mentioned.
/C Copy source file to destination (to copy from DMF disks).
/D Display cabinet directory (use with filename to avoid extract).
/E Extract (use instead of *.* to extract all files).
/L dir Location to place extracted files (default is current directory).
/Y Do not prompt before overwriting an existing file.Compares two files or sets of files and displays the differences between
them.
FC [/A] [/C] [/L] [/LBn] [/N] [/T] [/W] [/nnnn] [drive1:][path1]filename1
[drive2:][path2]filename2
FC /B [drive1:][path1]filename1 [drive2:][path2]filename2
/A Displays only first and last lines for each set of differences.
/B Performs a binary comparison.
/C Disregards the case of letters.
/L Compares files as ASCII text.
/LBn Sets the maximum consecutive mismatches to the specified number of
lines.
/N Displays the line numbers on an ASCII comparison.
/T Does not expand tabs to spaces.
/W Compresses white space (tabs and spaces) for comparison.
/nnnn Specifies the number of consecutive lines that must match after a
mismatch.
Configures a hard disk for use with MS-DOS.
FDISK [/STATUS] /X
/STATUS Displays partition information.
/X Ignores extended disk-access support. Use this switch if you
receive disk access or stack overflow messages.
Searches for a text string in a file or files.
FIND [/V] [/C] [/N] [/I] "string" [[drive:][path]filename[ ...]]
/V Displays all lines NOT containing the specified string.
/C Displays only the count of lines containing the string.
/N Displays line numbers with the displayed lines.
/I Ignores the case of characters when searching for the string.
"string" Specifies the text string to find.
[drive:][path]filename
Specifies a file or files to search.
If a pathname is not specified, FIND searches the text typed at the prompt
or piped from another command.
Formats a disk for use with MS-DOS.
FORMAT drive: [/V[:label]] [/Q] [/F:size] [/B | /S] [/C]
FORMAT drive: [/V[:label]] [/Q] [/T:tracks /N:sectors] [/B | /S] [/C]
FORMAT drive: [/V[:label]] [/Q] [/1] [/4] [/B | /S] [/C]
FORMAT drive: [/Q] [/1] [/4] [/8] [/B | /S] [/C]
/V[:label] Specifies the volume label.
/Q Performs a quick format.
/F:size Specifies the size of the floppy disk to format (such
as 160, 180, 320, 360, 720, 1.2, 1.44, 2.88).
/B Allocates space on the formatted disk for system files.
/S Copies system files to the formatted disk.
/T:tracks Specifies the number of tracks per disk side.
/N:sectors Specifies the number of sectors per track.
/1 Formats a single side of a floppy disk.
/4 Formats a 5.25-inch 360K floppy disk in a high-density drive.
/8 Formats eight sectors per track.
/C Tests clusters that are currently marked "bad."
Configures a keyboard for a specific language.
KEYB [xx[,[yyy][,[drive:][path]filename]]] [/E] [/ID:nnn]
xx Specifies a two-letter keyboard code.
yyy Specifies the code page for the character set.
[drive:][path]filename Specifies the keyboard definition file.
/E Specifies that an enhanced keyboard is installed.
/ID:nnn Specifies the keyboard in use.
Creates, changes, or deletes the volume label of a disk.
LABEL [drive:][label]
Displays the amount of used and free memory in your system.
MEM [/CLASSIFY | /DEBUG | /FREE | /MODULE modulename] [/PAGE]
/CLASSIFY or /C Classifies programs by memory usage. Lists the size of
programs, provides a summary of memory in use, and lists
largest memory block available.
/DEBUG or /D Displays status of all modules in memory, internal drivers,
and other information.
/FREE or /F Displays information about the amount of free memory left
in both conventional and upper memory.
/MODULE or /M Displays a detailed listing of a module's memory use.
This option must be followed by the name of a module,
optionally separated from /M by a colon.
/PAGE or /P Pauses after each screenful of information.
Configures system devices.
Printer port: MODE LPTn[:] [COLS=c] [LINES=l] [RETRY=r]
Serial port: MODE COMm[:] [BAUD=b] [PARITY=p] [DATA=d] [STOP=s] [RETRY=r]
Device Status: MODE [device] [/STATUS]
Redirect printing: MODE LPTn[:]=COMm[:]
Prepare code page: MODE device CP PREPARE=((yyy[...]) [drive:][path]filename)
Select code page: MODE device CP SELECT=yyy
Refresh code page: MODE device CP REFRESH
Code page status: MODE device CP [/STATUS]
Display mode: MODE [display-adapter][,n]
MODE CON[:] [COLS=c] [LINES=n]
Typematic rate: MODE CON[:] [RATE=r DELAY=d]
Displays output one screen at a time.
MORE [drive:][path]filename
MORE < [drive:][path]filename
command-name | MORE [drive:][path][filename]
[drive:][path]filename Specifies file(s) to display one screen at a time
command-name Specifies a command whose output will be displayed.
Moves files and renames files and directories.
To move one or more files:
MOVE [/Y | /-Y] [drive:][path]filename1[,...] destination
To rename a directory:
MOVE [/Y | /-Y] [drive:][path]dirname1 dirname2
[drive:][path]filename1 Specifies the location and name of the file
or files you want to move.
destination Specifies the new location of the file. Destination
can consist of a drive letter and colon, a directory
name, or a combination. If you are moving only one
file, you can also include a filename if you want
to rename the file when you move it.
[drive:][path]dirname1 Specifies the directory you want to rename.
dirname2 Specifies the new name of the directory.
/Y Suppresses prompting to confirm creation of a directory
or overwriting of the destination.
/-Y Causes prompting to confirm creation of a directory or
overwriting of the destination.
The switch /Y may be present in the COPYCMD environment variable.
This may be overridden with /-Y on the command line.
Illegal option '?'
usage: MSCDEX [/E/K/S/V] [/D:<driver> ... ] [/L:<letter>] [/M:<buffers>]
Loads country-specific information.
NLSFUNC [[drive:][path]filename]
[drive:][path]filename Specifies the file containing country-specific
information.
For information about the command-line parameters supported by
ScanDisk for Windows, look up 'checking for errors, in disks' in
the Windows Help index. Then view the topic 'Checking your disk
for errors every time your computer starts.'
Sorts input and writes results to the screen, a file, or another device
SORT [/R] [/+n] [[drive1:][path1]filename1] [> [drive2:][path2]filename2]
[command |] SORT [/R] [/+n] [> [drive2:][path2]filename2]
/R Reverses the sort order; that is, sorts Z to A,
then 9 to 0.
/+n Sorts the file according to characters in
column n.
[drive1:][path1]filename1 Specifies file(s) to be sorted
[drive2:][path2]filename2 Specifies a file where the sorted input is to be
stored.
command Specifies a command whose output is to be sorted.
Associates a path with a drive letter.
SUBST [drive1: [drive2:]path]
SUBST drive1: /D
drive1: Specifies a virtual drive to which you want to assign a path.
[drive2:]path Specifies a physical drive and path you want to assign to
a virtual drive.
/D Deletes a substituted (virtual) drive.
Type SUBST with no parameters to display a list of current virtual drives.
Copies MS-DOS system files and command interpreter to a disk you specify.
SYS [drive1:][path] drive2:
[drive1:][path] Specifies the location of the system files.
drive2: Specifies the drive the files are to be copied to.
Copies files and directory trees.
XCOPY source [destination] [/A | /M] [/D[:date]] [/P] [/S [/E]] [/W]
[/C] [/I] [/Q] [/F] [/L] [/H] [/R] [/T] [/U]
[/K] [/N]
source Specifies the file(s) to copy.
destination Specifies the location and/or name of new files.
/A Copies files with the archive attribute set,
doesn't change the attribute.
/M Copies files with the archive attribute set,
turns off the archive attribute.
/D:date Copies files changed on or after the specified date.
If no date is given, copies only those files whose
source time is newer than the destination time.
/P Prompts you before creating each destination file.
/S Copies directories and subdirectories except empty ones.
/E Copies directories and subdirectories, including empty ones.
Same as /S /E. May be used to modify /T.
/W Prompts you to press a key before copying.
/C Continues copying even if errors occur.
/I If destination does not exist and copying more than one file,
assumes that destination must be a directory.
/Q Does not display file names while copying.
/F Displays full source and destination file names while copying.
/L Displays files that would be copied.
/H Copies hidden and system files also.
/R Overwrites read-only files.
/T Creates directory structure, but does not copy files. Does not
include empty directories or subdirectories. /T /E includes
empty directories and subdirectories.
/U Updates the files that already exist in destination.
/K Copies attributes. Normal Xcopy will reset read-only attributes.
/Y Overwrites existing files without prompting.
/-Y Prompts you before overwriting existing files.
/N Copy using the generated short names.
Copies files and directory trees.
XCOPY source [destination] [/A | /M] [/D[:date]] [/P] [/S [/E]] [/W]
[/C] [/I] [/Q] [/F] [/L] [/H] [/R] [/T] [/U]
[/K] [/N]
source Specifies the file(s) to copy.
destination Specifies the location and/or name of new files.
/A Copies files with the archive attribute set,
doesn't change the attribute.
/M Copies files with the archive attribute set,
turns off the archive attribute.
/D:date Copies files changed on or after the specified date.
If no date is given, copies only those files whose
source time is newer than the destination time.
/P Prompts you before creating each destination file.
/S Copies directories and subdirectories except empty ones.
/E Copies directories and subdirectories, including empty ones.
Same as /S /E. May be used to modify /T.
/W Prompts you to press a key before copying.
/C Continues copying even if errors occur.
/I If destination does not exist and copying more than one file,
assumes that destination must be a directory.
/Q Does not display file names while copying.
/F Displays full source and destination file names while copying.
/L Displays files that would be copied.
/H Copies hidden and system files also.
/R Overwrites read-only files.
/T Creates directory structure, but does not copy files. Does not
include empty directories or subdirectories. /T /E includes
empty directories and subdirectories.
/U Updates the files that already exist in destination.
/K Copies attributes. Normal Xcopy will reset read-only attributes.
/Y Overwrites existing files without prompting.
/-Y Prompts you before overwriting existing files.
/N Copy using the generated short names.