Presentations
Sl. No. |
Year |
Presentation Title and Authors |
1. |
2008 |
S Majumdar, P Gupta, A Sharan, D Kumar, S Ilangovan, S K Roy, B K Santra & N Neogi, “Introducing improved control of exhauster system in converter along with online monitoring and diagnostics”, 62th ATM, Nov 15-16, 2008 |
2. |
2008 |
D Kumar, “Fault diagnosis of motors through signature analysis”, Technology Awareness Programme, Ranchi, Sep 2-5, 2008
|
3. |
2007 |
D Kumar, P Lakhe, A Sengupta, T B Singh, S K Roy, S K Mishra, B K Santra & N Neogi, “Automation of Hot Saws at Rail & Structural Mill of Bhilai Steel Plant”, Poster presentation at 45th NMD at Mumbai held during Nov 14-16, 2007, Received first prize in ferrous category |
4. |
2007 |
D Kumar, “Fault diagnostics through signature analysis of motor Parameters”, Technology Awareness Programme, Ranchi, Sep 6-7, 2007
|
5. |
2006 |
D Kumar, A Sharan, A Prasad, S Ilangovan, S K Roy & N Neogi,“Prototype development of Surface Inspection System for Cold Rolled Steel Strips”, International Surface Inspection Summit (ISIS 2006), organized by Steel Institute VDEh, Germany, held during 21-22 Feb’ 2006 at Luxembourg |
6. |
2006 |
D Kumar, “Application of PLCs and Networks in Rolling Mills”, Technology Awareness Programme, Ranchi, Jan 31-Feb 2, 2006 |
7. |
2005 |
D Kumar, A Sharan, A Prasad, S Ilangovan & B K Prasad,“Development of Prototype system for identification of surface defects on cold rolled steel sheets”, National Convention on Recent Automation Roadmap, Vishakhapatnam, March’ 2005 |
8. |
2004 |
D Kumar, A Prasad, N HariKumar, S K Sablok, R Muley, S K Roy, S S Verma & N Neogi, “Mill Status Monitoring and Control System for Rail & Structural Mill”, presented at 42nd NMD at Trivandrum held during 17-19 Nov, 2004 |
9. |
2004 |
B K Prasad, K N Rao, A Prasad, A Sharan, D Kumar, S K Roy, B K Santra & N Neogi,“Introduction of an Automatic System for measurement of Roll gap, Manipulator position with data acquisition at Plate Mill of Rourkela Steel plant”, Control Instrumentation Seminar, MIT, manipal, 5-6 Nov, 2004
|
10. |
2004 |
N Neogi, U Bhaskar, D Kumar & S S Verma, “Automation in Steel Industry: Global scenario and how to reach there?”, Technology Awareness Programme, Bhilai, April 15-16, 1004 |
11. |
2004 |
D Kumar, “Special Measuring Sensors in SMS”, Technology Awareness Programme, Bhilai, April 15-16, 1004
|
12. |
2003 |
A Prasad, B K Prasad, S Ilangavan, D Kumar, S K Sablok, S Sinha, S K Roy, N Neogi, S K Keshkar, R P Singh, R K Verma, A Parti & S B Patil, “Performance improvement of Tar Distillation Plan by introducing state of art instrumentation and control system”, NMD ATM held at Science City, Kolkata,14-16 Nov 2003
|
13. |
2003 |
KSR Murthy, D S Murty, M Roy, C V Suryanarayana, S K Sablok & D Kumar, ”Skidding Phenomena and development of identification and control system at 1150 mm stand of blooming mill in BSP”, paper presented in international conference CASICOM held at Ranchi, 26-28 Feb, 2003 |
14. |
2003 |
T N Natarajan, N Hari Kumar, D Kumar, R K Gupta & S S Verma,” Integration of fuzzy logic & overriding control strategy in automation of rail rolling mills”, paper presented in international conference CASICOM held at Ranchi, 26-28 Feb, 2003 |
15. |
2003 |
A Prasad, D Kumar, A Sharan, B K Prasad & S K Roy,”Identification of surface defects in cold rolled steel sheet through digital image processing”, paper presented in international conference CASICOM held at Ranchi, 26-28 Feb, 2003 |
16. |
2001 |
D Kumar, A Sharan, A Prasad, S Ilangovan, S K Roy & S Kumar, “Online coil weight estimation in coiler and auto-slow down of Skin Pass Mill”, 39th NMD-2001 at Bhubaneswar, 18-21 November, 2001 |