Material List
1 ea 1/2 X 10' CPVC pipe
1 ea 3/4 X10" " "
1 ea 1/2 X 10' non metallic electrical tubeing PVC
1 ea 3/4 X 10' " "
1 ea 1" X 10' " "
Note some shops will sell half sticks of pipe All pipe is Schedule 40
1 pk 3/8 Sink supply line
1 ea 1 1/4 X 12" sink drain extension tube
4 ea 1/2' cupler electrical pvc
7 ea 3/4" " "
12 ea 1" " "
2 ea 1 1/4 pvc cupler white
4 ea 1/2 X 3/4 pvc bushings
3 ea 1/2 cpvc cap
5 ea 3/4 copper cuple
2 ea 3/32 brass welding rod
1 ea 5/8 X 36" brass tube
Glue 5 min Epoxy or JB Weld kwik I use the JB weld its thicker But cost more.
Sand paper assorted grits up to 400 I use wet and dry it cuts down on the dust if you wet sand..
Bondo Glazing Spot putty to fill in small holes.
Electrical tape and masking tape.
Buffing compound, Solder.
Primer bondo black.
Paint any color you like I use a dark brown and a clear sealer.
X-acto knife and blades, X-acto saw, pipe cuter. small files, Dremel and bits..
I built this without the use of a lot of power tools but if you have them use them. But thay are not needed if you don't. The pipes on this site were designed to be built by all levels of craftsmen.
If your not wet sanding its best to wear a dust mask and gogles and dont forget to wear gloves when using Epoxy
