SKI
/ BOARD TUNING & TIPS
TUNING SKIS /
SNOWBOARDS (It really does matter). It will make the ski / board run
better with less effort.
I recommend
ZARDOZ NOTWAX as a rub on quick wax and I also add it to my
favorite Hot Wax. My favorite hot wax is Zardoz Fluoro +. For
base cleaning before waxing I recommend ZARDOZ Super Z.
Caution: Always have a professional adjust and test your bindings
WAXING INFO - HOW TO
Snowboards
Video -YouTube
- How to Wax a Snowboard
Skis
Video -
YouTube -
Alpine Ski Waxing
EDGING (tuning the angle of the steel edge)
To set the edge requires skill and should be left to
the shop. This skill can be taught ask the techs. A special tool is
needed and can be ordered on line.
At a minimum, a suggested tool for the edge is a set
of sharpening stones. Six inch stones in 120, 240, and 600 grit.
They cost $5 at Harbor Freight Tools.
Feel your edge and find the nicks and rough spots.
(get a tetanus shot) Use the stones to clean up the mess, add water
while rubbing in a circle. Do not change an angle the goal here is
to clean it up.
ZARDOGS' Mini Kit ski or board:
- Zardoz Notwax (Super Z, Notwax, Fluoro +)
Generic terms That is a Base cleaner, Rub on
wax, and Hot wax that can be rubbed on and buffed with
scotch brite pad or hot waxed.
- Set of sharpening stones. 12, 240, 600 grit
- Scotch brite fiber buffing pads.
--Total cost: Under $35.00
REFERENCE:
How to fix cuts in base, light scratches to core shots
-
For metal edge and or
core / fiberglass contact use co-polymer string (p-tex with
adhesive)
-
then build up with p-tex
repair string
-
finish off with p-tex
ribbon
-
Repair P-tex Gouge Tips Tognar
ZARDOZ FLUORO+, It's NEW & we helped test it over 2 years.
Click for the PDF report.
DIN SETTING
REFERENCE CHART
Ski/Board base structure
Factors influencing ski glide
Tognar Ski & Snowboard Tuning, Repair & Waxing Tips & Tricks
Tognar is a great site for tuning
reference. be sure to order their free catalog.
SNOWBOARD BINDING SETUP/STANCE how to set stance and a table
with the current settings .
I have
been using the ZARDOZ NotWAX Felix process for over 10 years.
I clean the Base. Fix
P-TEX. Edge. Apply Zardoz NotWAX. Apply hot wax
,Scrape, Use scotch bright pad to buff wax, Brush
tip to tail with a Bronze brush 20 times. Apply Zardoz NOTwax. I use a edge sharpener to bevel
my edges for easier turning currently 1 degree base bevel and
3 degree side. see tognar for bevel values. Then off to the professionals for
the binding check.
SKI / BOARD REPAIR
Top: Scratched ski, Bottom after
buff, LACQUER
If you get a chip in the top of
your skis or board it is easy to fix.
Clean area with acetone. Use oil
based paint. ( Model paint) to match the color. Let dry. Apply
fiberglass resin or auto body filler to the chip or hole. Let dry
all done.
Ski / board top scratched? Buff with rubbing compound, clean
with acetone. Spray a light coat of lacquer.
BRING
BACK THAT SHINE
Over time your ski equipment will
begin to loose the great shine it once had. I have discovered
that after cleaning the outside of plastic ski boots, a few light
coats of LACQUER will give the plastic that shine back. I have
used LACQUER to add shine to the top of my skis.
SKI JACKETS/BIBS
If you have a breathable fabric.
Goretex, etc. Only wash in NON-DETERGENT Detergent. This will help
keep the water repelling properties. Never use detergent since
it is a surfactant, wetting agent. I use a product called NIKWAX. There is a NON-detergent wash and a waterproofing wash in. Total cost to wash and add water
repel. 4$ wash 10$ water proofing this was for one set of bibs and
Ski Jacket. Took about an hour in my bathtub. It was purchased
through REI.
NIKWAX USA has good tips for garment care. or see
Body,
Gear
& Ride |