Looking to fill a contractor position for a PMEL Quality Assurance Specialist. Skills required for this position are as follows: a) Monitoring of the PMEL Quality Assurance Program, related processes; and determination of process improvements b) Application of a complete range of quality assurance methods to isolate defect trends, and identify corrective actions c) Monitor, track, report, perform statistical modeling, and assist in the performance of corrective actions d) Review and develop quality metrics and specialized data gathering techniques e) Provide updates to the PMEL Quality Assurance Plan as necessary to include improved processes, technologies, and concepts f) Develop quality characteristics for newly assigned Technical Measurement Diagnostic Equipment (TMDE) using available data sources (e.g., technical manuals, maintenance instructions, engineering drawings, and quality assurance policy/instructions) g) Generate and track Material Deficiency Reports; including the investigation of reported deficiencies This position will be located at Hill AFB Utah. No relocation allowance salary GS 11 – GS 12 equivalent depending on experience. Send resumes to the undersigned at lynnw@mltech.com

____________________________________________________________________________

JOB!!!

PMEL/Calibration Technician Company: Yulista Management Services Salary/Wage: Negotiable Job Category: Electronics/Mechanical Career Level: Experienced (Non-Manager) Location: Dahlgren NSWC, VA 22448; we are located in Northern Virginia, minutes away from Southern Maryland. Status: Full Time Relative Work Experience: 4+ years experience Education Level: Certification Yulista Management Services has an immediate opening for a PMEL/Calibration technician for its contract with the US Navy at Dahlgren NSWC, Virginia. Friendly environment willing to train inexperienced technicians. Required Knowledge and Experience: Technicians must have at least 4 years experience inspecting, troubleshooting, modifying, overhauling, aligning, calibrating and certifying TMDE and laboratory standards. It is highly desired that the candidate have Air Force PMEL certification and be experienced in most areas of PMEL to include general purpose electronic equipment as well as mechanical and physical calibrations. The candidate should have some computer skills and a working knowledge of the military quality system. Mandatory Requirements: All applicants must have proof of formal military or civilian training in the calibration and repair of TMDE. Must pass initial and subsequent drug screenings, be a U.S. citizen, and be able to obtain a security clearance. Must also have a valid and current driver’s license. Application directions: Apply for this position by emailing your resume to mmcgowan@yulista.com or lfurjes@yulista.com Or send by US mail to: Yulista Management Services PO Box 178 Dahlgren, VA 22448-0178

____________________________________________________________________________

JOB !!!

Title: Technician Specialist - Calibration Lab Value Center: ITT Aerospace/Communications Division Location: IN, Fort Wayne Req Number: 4632 Position Description: ITT Aerospace/Communications (A/CD), Ft. Wayne, IN Performs electrical, physical/dimensional, and mechanical tests and inspections. May perform system procedures or product audits. Also includes various duties of complex technical nature including, but not limited to wiring, constructing, assembling, inspecting, testing, cleaning, troubleshooting, repairing and calibrating electronic and/or electro-mechanical test and measuring equipment. Implements the quality control program on an assigned project to insure conformance of the product to quality standards and specifications. Experience Requirements: Equivalent Education Level Required - Graduation from High School plus two years formal technical training. Experience Required - Minimum four years applicable technician experience, i.e. experience in repair and calibration of electronic test equipment. Experience using physical dimensional calibration tools required. Experience with PHYS/D preferred. Knowledge Required - Requires a high degree of skill and ability in the technician field. Must be able to work from incomplete design information using specialized equipment and techniques. Requires application knowledge of Standard ISO/IEC 17025. PMEL training preferred. Must be US Citizen or Permanent Resident. Email: Sandi.Barbknecht@itt.com

____________________________________________________________________________

JOB !!!

Job Description: Calibrate and repair test and Measurement electronic instruments to maintain functionality and accuracy. Work on service assignments with clearly defined objectives. Perform routine tasks, using prescribed procedures. Solves technical problems of limited scope and complexity. Experience in the support of Agilent electronic test equipment. A demonstrated ability to learn new and changing technologies with training. Must be able to work in a team environment. Job Requirements: Test, Calibrates and repairs electronic instruments, products and modules to maintain functionality and accuracy. Responsible for test, repair, and calibration duties. Solves some technical problems. 3rd shift. ASET technical degree, previous Military PMEL experience Cynthia Short Technical Recruiter Volt Technical Resources | 9083 Foothills Blvd. Ste 370 | Roseville, Ca 95747 cshort@volt.com | t: 916.787.3700 | f: 916.787.0885 | toll free: 888-501-9048

____________________________________________________________________________