0.  Disconnect your internet connection.

1.  Install, ignoring any error messages.

2.  With the program not running, copy/paste the file ftk.exe from the \Registration\ folder on the CD to the folder on your hard drive where you installed Forensic Toolkit, over-writing the existing file of the same name.  The program will now run as registered.

4.  Note that you may now download the KFF Hash Library (filename kffinstall.exe) from the AccessData website and install it to get rid of the remaining error message when the program starts up.  This file is 179 MB in size. 

2.  Install using one of the following serials:

1.  Install the program

2.  Use this registration number:

2.  Choose the option to register by phone. 

3.  Run Register.exe (a keygen) located in the \Registration\ folder on the CD. 

4.  Copy and paste the above number into the "Serial" box in the keygen, overwriting the number already there.

5.  Copy the Install Code from the program into the middle box in the keygen, click the Make button, then copy the generated Authorization Code back into the program to finish activation.  Voila!

1.  Run \Registration\Register.exe (a key generator) on the CD to generate a Serial Number for use during installation.  Keep the key generator window open on your desktop!

2.  After installation, go to "Activation options", select activation by phone, obtain the Request Code (Activation Number), and use the key generator to generate your Answer Code (Authorization Code).

1.  Run \Registration\Authorize.exe on the CD to

generate a serial number.  Use this number during

installation of Acrobat 7. 

2.  After installation, choose activation by telephone,

and use Authorize.exe again to generate a code to

activate the software. 

1.  Run register.exe (a key generator) in the \registration\ folder on the DVD to generate a serial number for use during installation.  KEEP THE KEY GENERATOR WINDOW OPEN DURING INSTALLATION! 

2.  After installation run the program and during activation choose registration by phone.  (Note that your internet connection should still be turned off!) 

3.  Enter the Request Code into the key generator.

4.  Use the Response Code to finish registration. 

Run \Registration\Register.exe (a key generator) on the CD to generate a Serial Number for use during installation.  Afterwards, go to "Activation options", select activation by phone, obtain the Request Code, and use the key generator to generate your Answer Code. 

0.  Disconnect from your internet connection!

1.  Activate either the whole suite or individual products by running Register.exe (cvs/SSG key generator) from the \Registration\ folder on the DVD (or CD1) choosing the phone activation option.  You will first need to generate a serial number for use during installation; later copy the Request Code from the program into the key generator to generate the final Answer Code, which you will then copy back into the prgram to complete the "activation" process. 

2.  If you want to install InDesign as a standalone app, you will need to install "Adobe Common File Installer.msi" located in:  "(CD1)\Adobe Creative Suite 2.0\Adobe Bridge Services\".

Use any of these serial numbers to register.

See instruction for After Effects 7.0 Pro, which are essentially similar:  Turn off internet connection; use keygen (i.e. \Registration\register.exe\ on the CD)for serial number; choose registration by phone; enter request code to keygen; use response code to finish registration. 

 

1.  Install.  Choose "Registered Owner Version" during installation.

2.  Use one of the following serials:

1.  Install the software by running setup.exe, but

do not run the program yet.

2.  Copy the file GoLive.exe from the \REGISTRATION\

folder on the CD to the folder on your hard disk where

GoLive was installed, over-writing the existing file of

the same name.  That's it!  (Note:  Do not attempt to

register the software at any time!)

1034-1003-6388-1865-3691-8545  -or-

Use either of these serials for InDesign:

 

Use either of these serials for PageMaker:

1.   Install using any 24-digit serial number.

2.  After intallation, copy the two files from the

     CD folder \Registration Files\ to the installation

     folder on your hard drive (eg.  C:\Program Files

     \Adobe\Photoshop CS).  Overwrite the existing files.

 

Use This Serial:

0.  Turn off your internet connection and keep it turned off until installation is finished!

1.  Try the following numbers first:

Serial Number (used first during installation):

3771-5133-6253-7793-5817-0947-2692*

2.  If after using the Serial Number given above the Program returns the 3771...2692* Activation Number given above, then the Authorization Code given above will work also, and you will be done. 

3.  If the Program returns a different Activation Number, run the key generator \Registration\Register.exe\ on the CD and keep it open on your desktop.  (You may have to abort/restart the installation process.)  You may either type in the Serial Number given above or let the key generator generate one for you.  Then copy the Activation Number from the installation program into the key generator and generate an Authorization Code, which you must then type back into the installation program to finish the process.  -- That's it! 

 

Install with any User Name/Organization and use

1057-1214-4006-1011-8405-7989 or

1057-1213-7063-7310-8476-7987 as serial.

1.  Run Adobe installation.

2.  Run cd:\Registration\keygen.exe and copy serial

into clipboard.

3.  Fill in user information form in Premiere and paste serial from clipboard.   Install Premiere.

4.  IMPORTANT:  DISCONNECT computer from internet!

5.  On the Adobe Activation screen, select BY PHONE...,

press next.

6.  On the next screen find ACTIVATION NUMBER.  Type

it into KEYGEN in the 'activation number' field without

dashes.

7.  You will receive Authorization code.  Type it into

Adobe's appropriate field.  --  Voila!  You are activated.

 

Intall the software.  After installation, copy the three files AdobeLM.dll, Adobelmsvc Installer.dll, and memory.dll from the \Registration\ folder on the CD to your \Program Files\Adobe\Adobe Premiere Pro 2.0\ folder, replacing the original files of the same name.  That's it! 

1.  Run Register.exe (a key generator) in the \Registration\ folder on the DVD to generate a serial number for use during installation.  KEEP THE KEY GENERATOR WINDOW OPEN DURING INSTALLATION! 

2.  After installation, run the program and during activation choose registration by phone.  (Note that your internet connection should still be turned off!) 

3.  Enter the Request Code into the key generator.

4.  Use the Response Code to finish registration. 

1.  Install the game using this serial number:

2. Copy the file age3.exe from the \Registration\ folder on the DVD to the folder on your hard drive where you installed the game, over-writing the file of the same name.  -- That's it!

 

Install the app.  Then go to Help--> About AirLog...--> Enter Registration.  Register using info below:

Name:  All Mankind

Serial:  6400452131776320

1.  Install.

2.  With the program not running, copy the file Airplan.exe from the \Registration\ folder on the CD to the folder on your hard drive where you installed the program, over-writing the file of the same name.  The program will now run as registered.

0.  Disconnect from the internet!  Uninstall any previous version of Alcohol completely, including all drivers.  (See steps 1-5 below.  The normal uninstall process via the Windows Control Panel is not sufficient, and if you use it the new version of Alcohol will refuse to install.)

1.  Run "regedit.exe"

2.  Find "HKEY_LOCAL_MACHINE \SOFTWARE \Microsoft \Windows \CurrentVersion \Uninstall \{E9F81423-211E-46B6-9AE0-38568BC5CF6F}", then delete that.

3.  Find "HKEY_CLASSES_ROOT \Installer \Products \32418F9EE1126B64A90E8365B85CFCF6", then delete that.

4.  Now, to remove the Alcohol driver you need to go to HKey_Local_Machine \System \CurrentControlSet \Services.  Here you should fínd the Keys for the Alcohol Driver in the current version, a347bus and a347scsi, delete these Keys and remove corresponding files from Windows \System32 \Drivers folder.

5.  Check C:\windows\program Files\Alcohol Soft and delete the folder. Re-boot your PC.

6.  Install Alcohol 120% Version 1.9.5.2802 from the CD using the installation program "Alcohol 120% v1.9.5 Build 2802 Installer.msi."

7.  Copy "register.exe" from the CD into C: \Program Files \Alcohol Soft \Alcohol 120 and run it to patch the appropriate files. -- That's it!  The program will now run as registered. 

8.  IMPORTANT!  It is highly recommended to block access of Alcohol to the internet by using a software firewall.  Under no circumstances should you try to update the software from the alcohol-soft.com website. 

 

 

1) Run Setup.exe to install but do not reboot when prompted and do not run the program.

2) Copy Register.exe from the CD to the folder on your hard drive where you installed AnyDVD.

3) Run Register.exe and select the Crack option under AnyDVD and Patch followed by exit.

4) Reboot your computer.

5) VERY IMPORTANT! -- Immediately disable the feature "Automatically check for new AnyDVD Version" within the program, or it could happen that your installed version stops working!

 

0.  Disconnect from the internet. 

1.  Intall the software. 

2.  Double-click on AnyDVD.Key in the \Registration\ folder on the CD and add the information to the Windows registry.

3.  Run the software and immediately turn off the Autoupdate feature (so that the program will not attempt to update itself via the internet). 

4.  You may now reconnect to the internet. 

 

Follow instructions for AnyDVD 5.2.7.1 above.

 

0) Disconnect from the internet!

1) Run Setup.exe to install but do not reboot when prompted and do not run the program.

2) Copy Register.exe from the CD to the folder on your hard drive where you installed AnyDVD.

3) Run Register.exe and select the Crack option under AnyDVD and Patch followed by exit.

4) Reboot your computer.  Keep your internet connection turned off. 

5) VERY IMPORTANT! -- Immediately disable the feature "Automatically check for new AnyDVD Version" within the program, or it could happen that your installed version stops working!  You may now restore your internet connection. 

 

0) Disconnect from the internet!

1) Run Setup.exe to install but do not reboot when prompted and do not run the program.

2) Copy Register.exe from the \Registration\ folder on the CD to the folder on your hard drive where you installed AnyDVD.

3) Run Register.exe.

4) Reboot your computer.  Keep your internet connection turned off. 

5) VERY IMPORTANT! -- Immediately disable the feature "Automatically check for new AnyDVD Version" within the program, or it could happen that your installed version stops working!  You may now restore your internet connection. 

 

1. Uninstall any previous version (COMPLETELY)!

2. Reboot.

3. Install.

4. Double-click on AnyDVD.Key in the \Registration\ folder on the CD and add the information to the Windows registry.

5. Reboot.

6. VERY IMPORTANT! -- Start application and immediately disable the feature "Automatically check for new AnyDVD Version" within the program, or it could happen that your installed version stops working!  You may now restore your internet connection.

After installation go to Edit/Preferences/Register and type in the following information:

Registered To:  Apple

Registration Code:  UD6X-END2-D5EX-GV43-B22R

 

Archicad 9.0 installs without any serial number.  However, installation of Apple's Quicktime version 4 or higher on your computer is required for Archicad to run.  (The "Recommended" installation of Quicktime must be used, not the "Minimum.")

Quicktime v6.5.2 is included on the CD and may be installed using Registered To:  Java2k with the following Registration Number:

(Leave the Organization box blank.) 

 

Register using this serial:

AUCNA5-77HS95-KHT01P

Note:  Turn off automatic updates after registering.