|
||
| Home page |
|
PJ-3RF Performance Data |
||
|
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after this unit |
||
|
|
Filter Components |
Powdered activated carbon Non-woven fabric |
|||
| Filter Capacity |
6.5L / min [ Initial data, At pressure of 100 kPa and temperature of 20 degree C |
||||
|
|
|||||
| Filter Performance *2 | |||||
|
|
Reduction Efficiency (96 ) |
||||
|
|
Residual chlorine : Filtration capacity 12,500L *1 95% |
|
|||
|
|
Turbidity : Filtration capacity 12,500L *1 90% |
|
|
||
| Other removable matters |
Red dust, Molds and Sediment |
||||
| Helps remove |
Coloring odor and Taste |
||||
| *1 These test methods are based on Japanese Industrial standard (JIS) S3201-1999. | |
| Note : The reduction efficiency data in *2 are initial data based on a particular testing method Actual filter performance may vary very significantly depending upon the quality of your tap water | |
