EZ-Kut EDM-700 Material Safety Data Sheet

(1) Product and Company Identification

Product name: EZ-Kut EDM-700

Chemical name: Mixture

DOT Shipping name: N/A

SARA Title III Section 313: N/A

Manufacturer Emergency Phone Number

EZ-Kut  Fluid Products Div

4575 W Whitten Ct

Chandler, AZ 85226

Phone 480-753-9064

HMIS Rating: 1-1-0

(2) Composition

Severely Hydrotreated Petroleum Paraffin's TLV - 2300 mg/m3 per 8hr workday.

(3) Emergency First Aid Procedures

Eye Contact: Flush with water for 15 minutes. If irritation persists, seek medical attention.

Skin Contact: Thoroughly wash exposed area with soap and water. Remove contaminated clothing and launder before reuse.

Inhalation: Remove to fresh air. Call a physician if symptoms persist.

Ingestion: Do NOT induce vomiting - aspiration hazard. Seek medical attention immediately.

(4) Physical and Chemical Properties

Boiling Point (deg F) >400

Specific Gravity (water = 1) 0.77

Solubility in Water NEGLIGIBLE

Evaporation Rate (ether = 1) SLOWER

Percent Volatile 100%

Vapor Density 6.9

Appearance Clear Odor NIL

(5) Effects of Overexposure

Eyes: May cause severe eye irritation, redness, tearing, stinging, or swelling.

Skin: May be slightly irritating - redness or drying of the skin.

Inhalation: Excessive inhalation of vapors can cause nasal or respiratory irritation.

Ingestion: May cause gastrointestinal irritation, nausea, vomiting and diarrhea.

(6) Special Protection Information

Respiration Protection: Use NIOSH approved respirator for organic vapors in confined spaces or as needed.

Ventilation: Sufficient mechanical ventilation to maintain vapor levels below TLV and to prevent buildup of explosive concentrations of vapor in the air.

Protective gloves: Chemical resistant if needed to avoid prolonged contact with skin.

Eye Protection: Eye glasses to minimize splashing hazards.

(7) Stability and Reactivity

Stability: STABLE Hazardous Polymerization: Will Not Occur

Incompatibility: Avoid contact with strong oxidizing agent.

Hazardous Decomposition Products: Oxides of Carbon, Sulfur, Fumes, Aldehydes.

(8) Spill / Leak / Storage Procedures

Precautions in case of Spill or Release: Prevent entry into sewers or waterways by diking. Absorb small amounts using inert materials.

Waste Disposal Methods: Assure compliance with federal, state and local regulations.

Handling and Storage Precautions: Keep containers closed when not in use. Store away from heat.

(9) Fire Fighting Measures:

Flash Point Range: 265 F

Extinguishing Media: Foam, water - fog, carbon dioxide, dry chemical.

Unusual Fire / Explosion Hazards: Keep product away from ignition sources, such as heat, sparks, pilot lights, static electricity, and open flames.

Fire Fighting Procedures: Wear self-contained breathing apparatus with a full face piece.

The above information is accurate to the best of our knowledge, however it is not warranted to be. Users are advised to confirm that the information is current, applicable and suitable to their circumstances.

Product: EDM-700

Date Issued: 10-30-97

END of MSDS