CO2 Bombs
	I have made a lot of these. I like them because they produce an extremely loud noise when they go off. What I don't like about them is that when they go off they tend to shoot shrapnel. So when you light one of these you need to be extremely careful.
		To make a CO2 bomb you will need the following materials: Used CO2 cartridge Black Powder or Pyrodex Visco Fuse Electrical Tape Hot Glue Gun
		Take your used CO2 cartridge and make the hole at the top bigger. You could use a nail but I prefer to use a drill bit from a Dremel tool kit. Not only is it easier but it doesn't take as long.
			Once you made your hole bigger you need to fill the CO2 up with your black powder or pyrodex. It doesn't need to be filled up all the way but at least 3/4 of the way will do.
			When you have that done then you can put your fuse in. There is two ways you can put your fuse in. The first way is you can insert it in the hole and hot glue it. The second way is you can wrap part of the fuse with the electrical tape till it is thick enough to fit tightly in the hole Either way works very well. .
				Once you've done all that then you can light it. Seems stupid to light it because you spent so much time making it, but when you light it you will want to make more just like it .