GaryD's Mucky Fingers
Welcome to the DFX Page OK I Know its a xlt i haven't got a shot of the dfx yet!!! I have never believed in magic programs, for the xlt or the dfx. The program that work for me may not for you. So if you Try this program and it’s a bit lively or if the threshold is not stable try dropping the AC or VDI down. It should give you good depth with the standard coil This is a Program I use when on farmland. I find it fairly stable in most areas I have hunted. At the end of the day the coins have to be under the coil, to dig from the soil. Good luck Happy hunting GaryD Basic Adjustments: Target Volume 48 Audio Threshold 11 Tone: 209 Audio Discrimination: ON Silent Search: OFF Mixed Mode: OF AC Sensitivity: 70-74 DC Sensitivity: 35 Backlite: 0 Pro Options: Ratchet Pin Point: OFF S.A.T. Speed: 5 Tone ID: ON V.C.O.: ON Modulation: OFF AutoTrac: ON Track View: ON Then OFF AutoTrac Speed: 12 this you will have to adjust AutoTrac Offset: +1 Track Inhibit: ON Coarse G.E.B.: Fine G.E.B.: Discrimination Edit: Reject –95 to – 41 Accept –40 to +95 Block Edit: Reject –95 to – 41 Accept –40 to +95 Learn/Accept: OFF Learn/Reject: OFF Recovery Speed: 23 Bottlecap Reject: 3 Hot Rock Reject: 0 Sweep Speed: 11 Ground Filtering: 3 Visual Disc: OFF ICONS: OFF V.D.I. Sensitivity: 82-86 DC Phase: OFF Graph Averaging: ON Graph Accumulate: ON Fade Rate: 11 Preamp Gain: 3 2 Frequency (Best Data): ON 2 Frequency (Correlate): OFF V.D.I. Normalized: ON 1 Frequency (3 kHz): OFF 1 Frequency (15 kHz): OFF Ok I’ve done a bit more tweaking on this one it’s basically the same as the hammered programme, I just find it a little more stable in most areas that I hunt April 2004 Target Volume 48 Audio Threshold 11 Tone: 209 Audio Discrimination: ON Silent Search: OFF Mixed Mode: OF AC Sensitivity: 74 DC Sensitivity: 35 Backlite: 0 Pro Options: Ratchet Pin Point: OFF S.A.T. Speed: 5 Tone ID: ON V.C.O.: ON Modulation: OFF AutoTrac: ON Track View: OFF (Start off with this on find the right Autotrac Speed and then turn off) AutoTrac Speed: 12 AutoTrac Offset: +1 Track Inhibit: ON Coarse G.E.B.: Fine G.E.B.: Discrimination Edit: Reject –95 to – 46 Accept –45 to +95 Block Edit: Reject –95 to – 46 Accept –45 to +95 Learn/Accept: OFF Learn/Reject: OFF Recovery Speed: 23 Bottlecap Reject: 3 Hot Rock Reject: 11 Sweep Speed: 3 Ground Filtering: 3 Visual Disc: OFF ICONS: OFF V.D.I. Sensitivity: 84 DC Phase: OFF Graph Averaging: ON Graph Accumulate: ON Fade Rate: 11 Preamp Gain: 3 (you could try 4 with the dd coil) 2 Frequency (Best Data): ON 2 Frequency (Correlate): OFF V.D.I. Normalized: ON 1 Frequency (3 kHz): OFF 1 Frequency (15 kHz): OFF If you find that this one works ok for your area please let me know it would be good to get some feed back. "thanks" Updated 23 April 04 I’ve been doing some more testing with the 15 kHz Frequency with the DD coil. As you know it is supposed to be the best at finding Hammered coins, if you would like to try it and maybe give me some of your thoughts on the 15kHz I would like to hear from you 15 kHz Frequency Target Volume 48 Audio Threshold 11 Tone: 209 Audio Discrimination: ON Silent Search: OFF Mixed Mode: OF AC Sensitivity: 72 DC Sensitivity: 35 Backlite: 0 Pro Options: Ratchet Pin Point: ON S.A.T. Speed: 5 Tone ID: ON V.C.O.: ON Modulation: OFF AutoTrac: ON Track View: OFF (Start off with this on find the right Autotrac Speed and then turn off) AutoTrac Speed: 12 this you will have to adjust AutoTrac Offset: +1 Track Inhibit: ON Coarse G.E.B.: Fine G.E.B.: Discrimination Edit: Reject –95 to – 46 Accept –45 to +95 Block Edit: Reject –95 to – 46 Accept –45 to +95 Learn/Accept: OFF Learn/Reject: OFF Recovery Speed: 23 Bottlecap Reject: 1 Hot Rock Reject: 0 Sweep Speed: 2 Ground Filtering: 3 Visual Disc: OFF ICONS: OFF V.D.I. Sensitivity: 84 DC Phase: OFF Graph Averaging: ON Graph Accumulate: ON Fade Rate: 7 Preamp Gain: 3-4 2 Frequency (Best Data): OFF 2 Frequency (Correlate): OFF V.D.I. Normalized: OFF 1 Frequency (3 kHz): OFF 1 Frequency (15 kHz): ON GaryD

Return to home page!