Harness/Cart Instructions

Click on any of the diagrams to get a detailed view

The Harness

Materials needed for harness and halter

*  1  two inch buckle *  1  half inch buckle *  8  eyelets *  3  one inch black rings *  2 snaps

*  2  half inch rings with one flat side *  Small roll of two inch webbing *  10 feet half inch flat nylon rope *  1/4 yard fabric (for padding)

For the complete article and the building instructions 'Click here'

The Cart

Materials needed to build the cart

From half inch plywood cut: *  2  30 x 9 incg pieces (front and back) *  1  30 x 16 inch piece (floor) *  2  9 x 16 inch pieces (seat and backrest) *  2  9 x 9 inch pieces (seat sides) *  1 16 x 19 inch piece (underframe)

Also needed:

*  4  2 x 4s, 9 inches long (braces) *  2  3/4 x 3 x 24 inch pieces of wood (underframe) *  4  3/4 inch angle irons, 30 inches long (frame) *  2  1/4 x 1 1/4 x 25 inch pieces of iron (for bracing         fils to wagon box) *  2  1/4 x 1 1/4 x 5 inch pieces of iron (for bracing         fils to wagon box) *  2  eye screws, assorted nuts, bolts, washers and         hardware