NEW ! "Super-Amber" Gold-recovery Resins

No Longer available

4  times the collection  speed of any other resin!

Will not rob halogens from leach!

3 times the capacity of ordinary resins!

Designed for both Acidic or Basic waters and leaches!

Extremely selective in attracting precious  metals from Chlorine, Bromine, Iodine and Other leach solutions and  recovering ionic Gold from any water source.

Fast-collecting  Super-Amber contains high levels of available hydrogen makes it one of the most advanced  resins today.

Highest yields at the Refinery - Where it really matters to you. Refines cleanly (Refinery list provided with order)

"Super-Amber" Resin  holds up to 700 ounces of precious metals per 45 lbs. of resin and is probably the highest capacity resin on the market today.

"Super-Amber "        Physical    Properties:

Swelling - 45-50%

Sphericity - 90-round

pH operating range-2 to 11.

Weight - 45 pounds per cubic foot

Screen size - 60-100 mesh.

Capacity - up to 700    ounces of metal per 45 lbs resin (gold).

Recommended Bed Volume - 4 GPM per cubic foot of resin.

Polymer Structure -    Hydrogen ion styrene  crosslinked with DVB (Di-vinyl benzene)  bond.

Fuming Or Ashing -    Resin are cooked in a delicate and elaborate process, in several stages leaving precious metals  in the ashes. This portion is done by special labs.

Selectivity - Very  selective to gold, silver and all platinum group metals but rejects    calcium,magnesium and many other alkaline and base metals.

Maximum Temperature Continuous    Operation - 120 F.

MUST BE KEPT WET!

Please note that these "Resin Beads" can be put into any of our MICRON GOLD MACHINES for rapid  gold collection without any sediment buildup.....means you wont have to change any filters at all. Just run the units  until the beads are gold-coated and ready for stripping. All of our filtration columns come with special adapter bags for running with resin beads, and are easily converted in minutes from standard filtration to operate with the Resin Beads instead. This means a wide range of uses for your MicronGold Machine, as it can recover gold from leaches, directly from gold-in-tailings, muddy waters from old gold diggings, river water, wells , geo-thermal springs or any place you can imagine that has colloidal or fine, micron gold or precious metals. It is especially usefull in these dirty water situations, as no sediments clog the filtration, as the only thing that will stick to the Resin Beads will be Gold, Silver and Platinums! Because the "Goldpro" unit and the "Test" unit both have clear, see-thru filter domes, you can see what is going on all the time, and can tell precisely when you want to change out the media. This is not the case with other types of micron-gold devices, and a lot of the gold gets lost in the process. This is also ideal for those "N0-water" locations, like the desert, as the water can be re-filtered from the last batch of dusty, clay-filled waters after you have extracted the gold out of it with these Resin Beads, and add a new batch of gold laden materials. This can be done from a tub or barrel.....the water re-used until it becomes too thick to circulate, let settle, clean out the muck, and start over.