| Loudspeaker Drivers For Sale! |
| In the normal course of restoring, rebuilding and designing speaker systems, I've accumulated a number of drivers that I don't really think I'll be using soon. Better they go to someone who will put them to good use, so here's the list. NOTE: There are some drivers I'm looking for, for various projects... I've listed some below. I'd be greatly interested in trade suggestions, in lieu of cash, for any of these! Check out the list at the bottom of the page! |
| 1- JBL C8R116A Recone Kit (NOS). Fits 116A or 116H 8" woofer, as used in 4301, L19 and other JBL models. Kit is new in box. $65.00 1- JBL LE20-1 Tweeter (~1967). Alnico magnet cone tweeter. As used in early L100, C70 Alpha, L99 and others. Works perfectly. $50.00 1- JBL 2460 Horn Driver (~1974). 1" throat driver, uses phenolic element. No driver element- replacement driver element will be needed to use. At least some aftermarket JBL-2410/2420-style elements will fit. Cosmetically only in fair condition, but functionally ready to work properly (when new element installed). $40.00 1- Pair Jensen P15RJ Vintage Drivers (~1960).15" woofers with alnico magnets. Paper cone with paper surround. All original (not reconed, work perfectly, no holes/tears). 4 ohm impedance. Almost immaculate condition. $90.00/pr. 1- Mirage 10" Subwoofer driver (~1998). From Mirage powered subwoofer. Poly cone. About 150w max power handling. Reconed, in perfect working condition. $40.00 1- Pair MB Quart QM120 6.5" midbass drivers. (~1990). Autosound paper-cone midbass drivers, from the ORIGINAL MB Quart series (before Maxxis buyout of Quart). In good working condition, only cosmetically fair. $40.00/pair 1- Pair Peerless KO40MRF Midrange Drivers (~1988). Peerless can-back midrange- as used in Leach, Gales and many other speakers. Freshly refoamed. In good condition- some silicone sealer on flanges (from previous cabinets). Work perfectly. $60.00/pr. 1- Wharfedale Vintage Dome Tweeter (W70, etc) (~1968). From W70D cabinet. "Purple Dome" tweeter with black plastic phase shield (plastic shield removable- some Wharfedale cabinets did not use it). As used in W60, W70, W90 and other models. Works perfectly, in very good condition. $40.00 |
| Gordon's Driver Wish List |
| As mentioned above, there are some drivers, that I would like to aquire, for various projects and such. Here's a list of some of them. Note that with some of these, they don't NECESSARILY have to be working... I can recone many things. I would be willing to trade any of the above drivers for these, and may also be willing to consider partial trades. Sorry, I'm nor really interested in trading any other of the audio components I have for sale- JUST the drivers above... gotta keep things seperate and organized, somehow. Any Tannoy dual-concentric drivers, in pairs. Any size, any vintage, I'll entertain offers, as long as they WORK (yes, these MUST work for them to be useful to me). 2- Eminence Beta 10CX coax drivers. Need to be in working order, OR reconable condition if not working. Electrovoice TRX12 or TRX12B "Triax" drivers. Non-working fine, as long as in good cosmetic condition. Radian 8" coax drivers. Need to be in working order, or reconable. JBL M115-8 or M115-8A 15" Woofer Frames. PREFER blown drivers. Will be reconing with custom kit. Will buy these outright, if cheap ($10-15 or so). Any Electrovoice "L", "B", "DL" or "SRO" Series Woofer Frames Any size (10", 12", 15" or 18") as long as magnet is intact. These would include such as EV10L, EV15B, EV-DL18, SRO-12, and any other EV with 2.5" voice coil. Working or non-working OK. |
| Last Updated: Oct. 21, 2008 |
| Anyone interested should contact me: Gordon Waters (gwaters@inbox.com) |
| Trade for Silver, anyone? |
| One of my other interests, is pre-1964 US silver coins... dimes, quarters, half-dollars, dollars... any of them. I will trade anything on this page, for equivalent value (determined by spot price of silver- there's .715 oz. of silver per $1 face value of these coins) in old silver coins. Would also consider other silver items, as well, valued by weight... it would be hard for it to be too odd for me, as long as it's made of pure silver. :-) |