Home -chat
room - Advertise here
|
Hacker zone |
. Tools . Ezines . How to ... . Notes . Faq Try to learn instead of annoying others over the net . Feel free to ask your questions or share anything . E mail us by clicking on the inviter skull . |
This Page
is under Construction as we are trying to place the best of hacking for
you to use . As you may know they always change their layers inorder not
to be removed from the web . Visit soon .
Funnyface Corporation 2000 All rights reserved . |
Funnyface corporation , copyright 2000-2001 Home - Advertise here |
Tips on Using the Internet in Windows 95/98
Connection
All Staff
Connect with The World
You can define multiple connections for a Dial-Up Networking client. Click on the Make New Connection icon, and follow the New Connection Wizard's prompts to step through the process. Multiple connections come in handy if you need to connect at different speeds, use different modems for different connections, or if you want to network to the office and to your home PC from a notebook.
Dial-a-Network
When you're
away from the office, dial-up networking can put those distant resources
at your fingertips. Click on Dial-Up Networking in Accessories to set up
your dial-up client. You need Dial-Up Networking installed to use Windows
95's built-in Direct-Cable Connection as well. These can be used in lieu
of remote-access programs such as LapLink.
Do It Now!
Test your
Dial-Up Networking setup using a phone line as close to your server as
possible. This will make troubleshooting your connection much easier. And
don't wait until you need the hookup to try it out. You may have to make
adjustments to settings on both the server and the client machine.
Get a Bang
Out of Troubleshooting
Troubleshooting
a remote connection requires a methodical approach. Make sure each part
of the connection is working before moving on to the next. For example,
use Direct-Cable Connection to ensure that passwords are all OK before
testing a phone connection. Check to make sure that all the networking
protocols have been bound properly before you adjust settings in the protocols'
properties tabs. Once you install Dial-Up Networking, a software device
called the Dial-Up Adapter will be installed and all the protocols (NETBEUI,
IPX/SPX, e.g.) should be bound to the Dial-Up Adapter. You can check this
in the Network Properties dialog. If they're not properly bound, go to
Control Panel and click on the Add/Remove Programs, and then click on Windows
Setup. You can uncheck the boxes for portions of the communications component
to uninstall them, and then you can reinstall them.
Importance
of Ports
For a direct
connection, a parallel port is faster than even the fastest serial port.
A parallel port sends data 8 bits at a time, while a serial port doles
out bits 1 at a time. Whenever it's feasible, use a parallel port for a
Direct-Cable Connection.
Increase Modem
Speed In Windows 95
In Windows
95, your modem may not seem to work at its rated speed, but the true fact
is that the baud rate for your COM Port doesn't allow you to reach top-speed.
It's like having a Ferrari in heavy traffic. To improve your port speed,
go to Control Panel, System, Communication Ports, then double-click the
port your modem's on, then click the Properties tab, and set the Port Speed
to 921600 bps, that way you won't have any sort of filter on the Port.
Open Sesame
You may make
a connection--Direct-Cable or Dial-Up Networking--and then find that a
whole class of resources isn't available. Invalid passwords may be the
cause of this problem, because Windows 95 has trouble propagating passwords
across server boundaries, as from an NT server to a NetWare server. If
this happens, delete your password list file or files (*.PWL) on the client,
and then attempt to make your connection. Windows 95 will prompt for new
passwords and put them into the appropriate places, which should solve
the problem.
Perfect Match
You don't
have to have the exact same settings for a remote client that you have
for a local client. However, troubleshooting will be easier if the settings
on your remote client are the same as on an office client. After you establish
a connection, you can always experiment with other settings.
Pump Up Your
Modem
Looking for
the maximum performance out of your modem? If you have COM ports with a
16550 UART, a buffered serial port chip, you can squeeze a bit more performance
out of the ports with a simple tweak. Select Modems from Control Panel,
select your modem and click on the Properties button. Under the Connection
tab, click on the Port Settings button. If the Use FIFO Buffers item isn't
grayed out, you've got buffered serial ports. Set both the Receive and
Transmit Buffer all the way up to High for best performance.
Punctual Prompts
With Dial-Up
Networking installed, your computer will search automatically for files
or programs across the remote network if you want it to. But this can be
a hindrance if you're in the midst of work and inadvertently request a
resource that's unavailable. Don't sit waiting while your system searches
for something that's not there; click on Connections/Settings in the Dial-Up
Networking dialog and then click on Prompt for Dial-Up Networking. With
this option set, Windows 95 will ask you if you really want to make a remote
connection before it initiates it.
Redialing With
Dial-Up Networking
When you first
installed the dial-up networking feature, filled in all the data, pressed
connect, got a busy tone, and were forced to press connect again, you probably
wondered why Microsoft forgot to include a redialing option. I had the
same experience. But knowing Microsoft, I suspected the option to be present,
probably just carefully hidden somewhere. It turned out that it wasn't
hidden after all, just tucked away in some menu you're not very likely
to touch because everything works fine. Just double-click My Computer,
double-click Dial-up Networking, and go to the Connections menu. There,
you'll find a setup option that lets you define your redialing parameters.
Serious Serial
If you can't
set up a parallel-port connection for a Direct-Cable Connection, then make
sure your serial port is pumping as fast as it can. Check your system's
BIOS setup to make sure the serial port is in high-speed mode. If there's
no option for high speed, or no reference to a 16550 UART (Universal Asynchronous
Receiver Transmitter) then consider buying a high-speed serial-port add-in
card. One costs about $60--a small price to pay to gain a quicker connection.
Serve Yourself
If your network
administrator hasn't set you up with a remote LAN access server connection
for your Win95 client, you can do it yourself--with some help from Microsoft
Plus. First, enable file and printer sharing on a Win95 computer you set
up to act as your network server. You can turn on file and printer sharing
from the Networks Control Panel item, or by right-clicking on Network Neighborhood
and then choosing Properties. While still in the Properties dialog, select
the Access Control tab and choose either "Share-level access control" or
"User-level access control" (one may be grayed out, depending on the type
of network you're connected to). Now install the Plus Pack, open the Dial-Up
Networking client and click on Connections. Click on Dial-Up Server, and
a tabbed dialog will appear with the name of the installed modem on the
tab. If you have more than one modem installed, there will be multiple
tabs. Click on the "Allow caller access" button, and you'll see either
a list of people to whom you can allow access, or you'll be prompted for
a password for remote callers to use, depending on whether you selected
User- or Share-level access control in the Properties box.
Share Where?
You will not
be able to access remote NetWare servers if your client has file and printer
sharing for NetWare networks enabled. Disable file and printer sharing
for NetWare networks on the client (not on the remote server) to gain access
to remote NetWare servers.
Where Can You
Share?
When using
a Direct-Cable Connection--between a notebook and desktop system, for example--make
sure that you enable file and print sharing for Microsoft networks. On
the desktop computer (the server for the Direct-Cable Connection) right-click
on Network Neighborhood, or double-click on Network in Control Panel, then
click on Add. In the dialog box that appears, click on Service and then
Add. A display with manufacturers on the left and services on the right
will appear. Click on Microsoft, File and Printer Sharing for Microsoft
Networks and OK. Windows 95 may ask for its CD or one of its diskettes
to install the appropriate files.
Windows 95
Communications
Windows 95
has far more built-in communications features than its predecessor. HyperTerminal,
which installs with Windows 95, lets you hook up with text-based bulletin
boards or online services. Other Win95 communications features provide
local and remote PC-to-PC connections. You can, for example, connect a
notebook PC directly to a desktop machine, or gain access to networks remotely
over dial-up connections.
Wired by a
Wizard
A wizard will
help you set up a Direct-Cable Connection. When you click on the Direct-Cable
Connection icon in the Accessories group, a wizard is available to make
sure you get through each setup step successfully. Be sure to use the right
kind of cable for the physical connection. A LapLink cable will work fine.