LIST of works performed by "KHERSONMETALLOSERVICE"
(subdivision of Kherson Shipyard)
1.
Straightening of rolled steel sheets of 3 to 50 mm thickness with max. dimensions
of 3200 x 16000 mm.
2. Straightening of all types of rolled steel shapes in two planes.
3.
Blasting of rolled steel sheets of 3 to 50 mm thickness with max. dimensions
of 3200 x 16000 mm and all types of rolled steel shapes in "GUTMANN" shot-blasting
unit to SA-2.5 standard, and shop-priming in "METZGER" painting plant. Possible
monthly processing of rolled steel is up to 3000 t.
4.
Cutting of parts from rolled steel sheets on heat-cutting machines with executive
routine programs, and further edge treatment for welding (chamfering): - plasma-cutting
machines ensure cutting of 3 to 30 mm thick sheets with max dimensions of
2000 to 8000 mm. - gas-cutting machines ensure cutting of 5 to 100 mm thick
sheets with max dimensions of 3200 to 16000 mm.
5.
Cutting of parts from all types of shapes using manual and semi-automatic
gas-cutting with edge treatment for welding.
6.
Bending of parts from sheets of all types of forms, including sophisticated
bending using templates and carcasses.
7. Cutting of parts from rolled steel sheets with straight-line cut bv means of gate shears thickness of 2 mm to 24 mm.
8.
Stamping of bottoms from 6 to 10 mm thick sheets and 350 to 800 mm diameter.
9. Corrugation of steel sheets of i to 2 mm thickness with max dimensions of 1000x 2000 mm.
10.
Assembly and welding of all types of steel structures.
