Welcome! I'm Joe Schultz III, Owner/Driver/Mechanic of
the JSRT SCCA GT-1 Chevrolet Monza. I'm also the Webmaster
for my H07 website, the MONZA
GT REGISTRY.
My tube-frame roadracing monza was built in 1979 by Dan
Gallant for driver Mark Pielsticker. Mark campaigned the
monza in the SCCA Trans-Am Series from 1980-82. In 1980,
the 
monza was all black,
#33 with sponsorship
from International Harvester. He won the Portland T/A race
that season, finishing fifth in the final points
standings.
David Horvat would purchase the car in 1983 and would enter
the monza in the S. Eastern Div. Regional and National SCCA
GT-1 races from 1983-89. Although usually running a SBC V8,
the monza at one time had a Buick Fuel-injected V6!
Richard Stone would purchase the monza in 1989 and enter
the San Diego and Cal
Club SCCA Regional and National GT-1
races. In 1991 he would win the San Diego Regional GT-1
Championship.
1992 was a great year for Richard, as he won the Southern
Pacific Division GT-1 National title. He would repeat as
Champion in 1993.
Richard also contested the highly exotic and competitive
1993 Toyota Super Production Series. He would finish 8th in
points at seasons end against much more modern
racecars.
I sold my GT-4 Datsun PL-510 in late 1994 in order to
purchase Richards monza. It was a childhood dream come true
to finally own a tube-frame roadracing monza. The monza was
purchased as a roller, as I had a high-performance sbc 331
V8 already sitting in storage.
I converted the sbc 331(327 .040" over) to dry-sump
condition, as well as some other racing mods to the block.
I plumbed the engine compartment myself with Earl's
Stainless.
MY MONZA FEVER RESULTS...
2/28/99 ... I attended the SCCA Cal Club super school in order to renew my racing license. Saturday
looked pretty good as the car ran well all day. This was my
first time in a big bore GT monster, so I knew it would be
a big step up from my gt-4 datsun 510. The sound of a sbc
uncorked is FANTASTIC!!! My only problems with the monza
were when the shifter assembly came loose, which made
finding any gears impossible. My clutch master cylinder
decided to slowly leak, which also hurt the shifting. These
two problems slowed down my lap times. The engine was
fantastic, so a little work on the shifter was all I
thought I would need.
Sunday would produce ignition gremilins which would eventually end my day early.
I learned a
great deal about the monza, and will be adding an
alternator, rebuilding the clucth master cylinder, safety
wiring the shifter bolts(!), and a few other improvements.
I still had a great deal of fun driving the monza, and
can't wait to get her on the track again!
Here's a tech
sheet on the monza...
Chassis- 1976 GM H07 (4-cyl.!!)tub converted to a
tube-frame chassis by Dan Gallant in 1979.
Engine - 1967 sbc 327, .040"over, modified for dry
sumped oil system.
Pistons - Chevrolet 327 turbo model, high dome.
Rods - Z28 Pink
Crank - Chevrolet Steel, small journal. Rotating assy. is
fully balanced.
Heads - Chevrolet Stage III Aluminum, 2.05/1.65
Valves. Port matched to intake.
Intake Manifold - Chevrolet 23* Tall port, long
runners(same as in T/A).
Waterpump - Moroso High-volume, Aluminum.
Dampner - Chevrolet 400 cid.
Exhaust - Twin Flowmaster 105 dba, custom-fit
single-runner headers
Dry sump oil pump - Weaver 3-stage.
Filters/Coolers - Oberg (engine), Earls(fuel),
Moroso oil cooler
Carb. - Holley 4150 DP 750, annular discharge, modified
for racing.
Ignition - MSD Crank Trigger, MSD 6A Box, Mallory
Dist.(gutted).
Plumbing - Earl's Stainless throughout car.
Gauges - Stewart-Warner Gauges, Moroso Mech. Tach
Clutch/Flywheel - McCloud 3-disc, aluminum.
Trans - Muncie M-21 Close-ratio
Rearend - Speedway Quick-change
Brakes - Front - Wilwood GN, Rear - Wilwood Superlites.
Wheels - Centerlines, 5 on 5 pattern.
Front - 16x10 , Rear - 16x12
Tires - GOODYEAR!!!!!
Body - IMSA DeKon Phase V Style, Wide-body
Windows - Front - Gm Glass, rest is
plexiglass.
This engine is a little tame by GT-1 standards (6500 rpm). The SCCA want me to alter the car too much to run gt-1, so I will run vintage and have fun. I hope to restore the car to it's 1980 trans am series specs by 2007.
If you have a chance to catch any of the Cal Club Races in
the near future, look for my monza and stop by and say
"HI".