About PhotoSaver32.

PhotoSaver32 is a freeware 32 bits screensaver which runs on Windows 95 and NT 4.0 (not tested on Windows NT 3.5). It displays a bouncing bitmap, jpeg or wmf image of your choice. 

Photosaver32 can be used without any limitations and can be distributed freely. However no-one other than the programmer of this product can claim commercial/legal ownership and charge more for it then the sole distribution costs. If you want to sell this product for more then its distribution costs you must contact the programmer.

PhotoSaver32 is created by Henk Hagedoorn, 
HJH Software and Design
Amsterdam, july 1997

e-mail:
hjh@usa.net
freeware@bigfoot.com

There is also a 16 bits version of Photosaver, which only displays bitmaps. For updates, other software and other screensavers visit:

http://www.freebyte.com/screensavers1.htm
http://www.freebyte.com/freew1.htm
http://www.simplex.nl/~hjh


The following files are part of photosav32.zip:

photosav32.scr (the screensaver itself)
default.bmp (example bitmap image of the head of Bill Clinton)
floral.wmf (example vector format image)
roadscen.jpg (example compressed jpeg image)
readme.txt (the file you are reading right now)


Installing PhotoSaver32.

Simply copy the files photosav32.scr and default.bmp into your Windows directory. Then in the usual manner (with Windows control panel) select this screen saver to be the active one. 
The other two image files can also be selected for display by configuring the screensaver using the control-panel.


Configuring Photo Saver32

The default image is default.bmp but you can configure
it to display a jpg/bmp/wmf image of your choice. Configuration is done in the usual way for screensavers:
1 start the control-panel, 
2 start desktop (win3) or display (win95)
3 select the screensaver 'configure' option.


Possible problems:

* Sometimes Windows only recognizes a newly installed screensaver if it is copied into the Windows\System directory instead of the Windows directory. 
* On rare occasions the computer has to be restarted before a new screensaver is recognized.
* Images which are too large (like bitmaps for printing) will not load and cause an errormessage.
* Rarely, a JPEG image will not be loaded and causes an error message. This has to do with an incompatible compression method used in that specific JPEG image.



Henk Hagedoorn
hjh@usa.net
freeware@bigfoot.com
