SPICE RELATED PROGRAMS
These programs were written in GWBASIC, an old program that was distributed with some versions on DOS. They should run in most versions of BASIC. You can download the programs and documentation by clicking on the name below and then on FILE and SAVE AS. Save them in a folder on your hard drive.
| File Name | Description |
| SPICE.DOC | Hints on avoiding convergence problems and "time step too small" messages. |
| SMPLOP.TXT | Writes a simple model of an op amp with single R-C rolloff. |
| SMALLOP.TXT | Models op amp input/output resistance, input bias voltage and current, internal/external compensation, and phase margin |
| LINOP.TXT | Models internal/external compensation, input bias voltage and current, phase margin, input/output resistance, and slew rate. |
| BIGOP.TXT | Models an op amp with all limitations such as input common mode range, gain or bandwidth versus temperature, and output current limit. |
| COMLIN.TXT | Models current mode op amps made by Comlinear Corp. |
| IFOA.TXT | Models a current mode op amp with input bias voltage and current, noise, output resistance and current limit. |
| COMPS.TXT | Makes a simple model of a comparator with collector or emitter output, models input bias voltage and current, slew rate, delay time, and saturation voltage. |
| NOISE.TXT | Models white or pink noise current and voltage sources. |
| PINK.TXT | Models noise that falls off at less than 20 dB/decade. |
| SPI.TXT | Generates the control commands for SPICE output. |