Lasetec II – Clean Precise Laser Beam Printing

Press Release: January 2003

 

 

Gone are the days of inkjet printing, of smeared inks and hard to read characters. The Lasetec II offers crisp, clear, permanent letters and amazing clarity. The system is software driven and versatile with a selection of font styles and sizes.

 

Advantages of Lasetec II:

 

• Easy to use with simple menu choices with advanced diagnostics for maintenance and system configuration.
• Self-monitoring for constant beam intensity for even marking
• Offers optimum character quality for all surfaces
• Prints at any angle or orientation
• Projected red image of code for correct alignment
• Ideal for wide range of applications – glass, metal, foil, plastic, carbon, etc.

 

 

Lasetec II is manufactured in USA and is the latest model now available in Southeast Asia. A unit is available in Singapore for demonstration.

 

Click to view additional information:

Samples of Print Applications

Features, Benefits and Comparison Chart

 

 

Seize Cost Savings and Enjoy Higher Efficiency Levels with

AccuScreed and MegaScreed

Press Release: November 2002

 

Construction contractors can now enjoy a new cost effective method in laying a ‘flatter floor’ and deliver a better quality finish. AccuScreed and MegaScreed, a practical and inexpensive new screed system from U.S.A.,  is a big time saver because of its quicker set-up time. Jobs can be done faster and profits can be realised on its first application.

To download AccuScreed and MegaScreed Pamphlet, click here.

Some of its benefits are:

1) Enables user to pour concrete with less slump

·               Less water means stronger, longer lasting concrete that is less likely to fail slump cone or break testing

·               Decreases required finishing time resulting in labor savings

·               Allows for easier finishing with less agitation, bleed-off, and no excessive surface cream, which is eliminated by even curing from a better distributed concrete mixture

2) Once pour elevation is determined, no measuring is necessary

• Saves expensive, unnecessary labor time wasted on constant remeasuring, allows a faster setup and pour with improved accuracy, and flatter end results
• Allows user to set accurate elevation without variance caused by tape measure errors or damaged stakes
• Eliminates costly low or high spots in finished concrete that are associated with other screeding methods

3) Uses standard 1/2" EMT conduit for screed stakes

• Can be set in all types of subgrades
• Sets faster by 3 to 1 compared to other methods
• Conduit is less expensive than steel or wood, and can be recycled from demolition sites or from electrical scrap

4) Allows user versatility

• Can be used with power screeds, concrete pumps, vibratory screeds, or when hand striking concrete
• Use for slab on grade, pavers, resurfacing, over wood or steel decks, vapor barriers, precast concrete, and radiant heating insulation
• Removal of pipe and/or power screed is not necessary while adjusting for deflection or specific runoffs

5) Designed to eliminate usage errors or problems

• The Driver's height indicator is an 8 penny nail which can easily be replaced at the job site, if ever damaged
• The highly visible, light weight Yokes are virtually unbreakable. They are adjustable and will not expand or contract when left in the pour. They will remain accurate regardless of the angle the conduit stake is cut, or the direction the Yoke is turned

6) Extremely cost effective

• When hand striking, the cost of Yokes left in the pour is less than 1/2 ˘ per Sq. Ft
• When using a power screed, the cost of Yokes left in the pour is less than 1/4 ˘ per Sq. Ft.
• Although not cost effective in relation to labor time, our Yokes are reusable and can be easily washed in water

 

******************************

NEW SHIPMENT OF MARSHALLTOWN USA DRYWALL PRODUCTS JUST ARRIVED IN SINGAPORE!

Press Release: January 2002

 

Marshalltown USA manufactures only the best hand tools for the Construction Industry since 1890. ATM is pleased to announce we are the sole stockiest and distributor within Asia. We supply Drywall, Concrete and Masonry tools from our warehouse in Singapore.

Marshalltown tools such as Drywall hand tools, Taper Knives, Pole Sanders, Plastering Trowels and Finishing Trowels (to name a few) are highly sought after by the professionals for a high quality finish.

As reported in The Straits Times, July 11 2000, a new building method researched by Nanyang Technological University (NTU) that does away with horizontal beams and uses light weight partition walls for flexible interior design will soon be launched. Marshalltowns wide range of hand tools are specifically manufactured for such applications.

Contact us today in order for us to help you in selecting the right tool for the right task, we will be happy to assist you in your requirements.