plans

I have several Plans That I want to do.
With the Turbo Grand Prix's.
I want to build the Current STE Turbo I have Up to 400+hp

For the Building of my current STE
Rebuild a Replacement 3.1 Vin V
So that way I can do a powerbuild on that motor
and not have to worry about my car and if
I ever want to put the correct motor back in.

THINGS THAT WILL BE DONE.
the block is going to be Bored .30 over and stroked to up the displacement 3.4-3.6L
I am Upgrading the injectors to 32Lbs
a 3100 or 34oo top end swap.
Upgraded Fuel Pump and lines.
Relocation of the Fuel Lines.
A T3/4 hybred Turbo convertion.
a Jeff M Chip and Cross-over pipe.
Upgraded Rocker and lifters .
a Bucket seat convertion for the rear seats.
also recovering of all the seats in the car. {katzkin.com}
all in two-tone Grey with custom STE logos stiched into the headrests.
adding a HUD unit.
adding a On-board personal Computer {more on that later}
also adding an muti media system to the car.
with a Full Custom install of the stereo.

I am also Planing on a New Paint Job.
done the Right way, everything is getting taken off the car.
and the color maybe changed from Plain white to
Pearl White as seen on the late 90's early 00 Cadillacs.

I want to Upgrade the Alt to a 160 amp powdercoated White.
But For now I got a 130 amp off of ebay for 48.00 Shipped with a New belt.
I also want to install Neon Lights Under the car and under the hood.

I would love to make this car a mid 10 sec car with the use of Nos. {11.5 with out}
I am still worried about using NOS with a Dual Shot one 75 shot and one 125 shot.
I have recieved some talking to about the Use of NOS
but I don't want to use it except for at the track.
and for Intimidation when sitting at a light. With the whole Purge system and all.

I also am going to install a Engine Dress Up kit. Silver Breaded Hoses with Purple end caps.
also Purple, White,& Neon Green Wire Lomps. Polishing of the Aluminum intake and Heads.
I also would like to change the intake and other hoses to Metel {Aluminum} and in a Purple Metelic Color.

I want to make a custom pipe setup
to use as Cooling holes for the Front Brakes.

I am going to have a Full Custom Stainless exhaust from the Front to the Rear 2.5 to 2.25 at the Y going to 40 series Flowmasters.
and out though a set of Seville STS tips.
Run a High Flow cat.

Also installing a Set of 245/45/18's or 245/40/18's
I am also planing on doing a 1.5"~3" Drop on the car.
a Brake Upgrade to a newer style bigger design.
and bigger rotors {cross drilled} and better calipers 13" front 12" Rear
Puting in a set of Strut tower Braces Front and Rear.
Bigger Sway bars in the Front and Rear 34mm Front 22.2mm Rear.
New Poly Bushings all the way around.
Install the Drop leaf Mono leaf with My Kyb struts

Im going to Replace the Rack and Pinion on the car also.
with a moog life time system.

and this is just what I can think about at the top of my head.
the way I look at it. where am I going to get a 11-12 sec car for $20,000.
And this car will be Brand new when I am Done and I plan on getting another 135,000 Miles out of it.
And after all this I hope to have about 405hp at the tires.