Title: Technogen Corp.

The Tech Lite lever set is the light weight winner.

The Tech lever uses a traditional non-compound pulling action. The clamp piece is made of machined 6061-T6 aluminum, with two clamping bands. Each of the bands has a small recessed cap bolt that spans a 5mm gap anchoring into the opposing side. As the bolt is turned the 1.15mm thick clamp tightens onto the handlebar. The cap bolts are made of stainless steel and have a 2.5 mm hex fitting. The middle of the clamp assembly is machined away so the handle piece can be mounted inside the clamp housing. The lever is machined from 1/4" thick aluminum plate. Mill work in the clamp area reduce the handle weight. A coiled spring has one end bolted to the handle with the other end hooked around the clamp tightening bolt nearest the stem. This is the lever return spring and pulls the lever closed when released. The cable convenience adjuster is machined from aluminum with 5mm by .8mm threads. The side of the adjuster is cut through so threading a new brake wire is easy. The fixing nut, holds the adjuster's position.

The handle is covered with a Black foam rubber sleeve that builds out its shape and cushions the riders grip. The Tech Lite levers have reach adjustment. The area for finger grip is 80mm long. The clamp piece comes anodized in Blue, Black, Lavender, or Silver. The weight of the Tech Lite levers is 115 grams