Henrys Viper
This review was written by Spunky. Email him if you disagree with anything. Again, his email is on his page, so just click members, and click his name. Aw, screw it, I'll just make a link to his email here.
Spunky

Review:
These Yo-yos are Henry's top of the line. I would higly reccomend getting one. They aren't easy to get up though, but my mod fixes that. It sells for around 20 to 40 dollars depending if you want the new style, or the old one. I would have to say, get the old style. First of all, it's cheaper, second of all, it has a lot more mods available. The Viper is a decent sleeper and is superb on string tricks. Pop-up tricks are usually half-impossible to do, but with the Viper, it is a lot easier.

Mod:
This mod is exactly like Doc Pop's vier mod, but with my little tweak! This is the way I do it, but you can switch it around if you like.

You will need:
3 shims (smaller than the bearing, but bigger than the axle)
1 Viper
1 Bottle of Super Glue
1 5/16" wrench
1 Slick 6 string

Steps:
1. Take your Viper apart
2. Hold the half without the axle
3. Place 4 90 degree drops of super glue responsiveness
4. Let it dry. Go eat a sandwich

Part II:
1. hold the side with the axle in it.
2. Take the axle out, carefully, with a 5/16" wrench.
3. After you get the bearing off, in between the bearing and the ridge, put one shim on and then slide the bearing back on.
4. Now, take the other two shims and put them on the other side of the bearing.
5. Take the wrench and screw the axle back on.
6. Put on the Slick 6
7. Play!!

-Spunky

Bananas are funny, Bums are hairy!