1.
Open a new image
300x300 pixels / BG color: Black /72 dpi.
Create a New Layer named: swirl. |
2.
Set vertical and horizontal guides to 150. |
3.
Click on the Tube button
and choose the ball-pink swirl tube and choose these Settings /scale:
100 - step:146. Place cursor on the guides and click to place tube
in the center. |
4.
Now go to Color/Colorize
and use the settings shown to give it a nice metal look. Hue: 30
/ Saturation: 30. You can adjust these to suit the look You want. |
5.
Create a New Layer and name it Flare. Go back to the Tubes button
and choose the
flare tube. Set the scale to: 200 - the step to: 139.
Click on the center of the new layer to place the image in the center. |
6.
Set the Flare layer's opacity to 50%
|
7.
Zoom in on the
image 3 times. Make sure the flare layer is selected and click on
the lasso tool
and choose the Settings / Point to Point / Feather 0 / Antialias
checked. |
8.
Select the area as shown. When You have it selected hit the delete
key.
|
9.
Choose the Lasso tool
again and keep the settings like before. Make sure the Flare Layer
is still active.
Select the new area as shown and hit the delete key.
|
10.
Run the opacity on the Flare Layer back to 100%. You might have
to take the eraser tool
and erase any of the Flare Layer You might have missed.
Go to Layers/Flatten/Merge All [flatten] |
When
you get all the leftovers erased it should look like the one below.
|
I
hope this tutorial will give You some ideas. You can use these steps
to blend images of all kind. Play around with it and show Me what
You come up with.
Here is a button I made from it.
Heres a piece from an old splash page
I did awhile back using this technique.
|