Took the bike on a good hard run out to Naduruloulou Aquaculture Research Station. It ran well, with no missing. After a 10-min. cool-down I re-started to return and RH throttle jammed right away. It stuck tight in the bore and would not drop. I rode it like that to Sawani Service Station and borrowed a pair of pliers to slacken one nut right off. It still wouldn’t drop. I had to limp home on it like that.
Once home I removed the carb slide and rubbed it down with #340 wet&dry sandpaper to remove the high spots until the slide would drop into the bore by gravity only.
Tried running the bike to work for a couple of days, but it runs rough and doesn’t feel “right”.
