The 67-72 Online GM Truck Show
Hello, My name is Jesse Smith and Welcome to the online truck show site for 67-72 Chevrolet and GMC trucks. The voting is over now and the prizes have all been handed out. Thanks to all the people who sent in entries and votes! I have built and maintained this site with encouragment from people on the message board at the 67-72 chevy trucks resource page. This truck show was sponsered by GMCPauls Truck Parts. Paul has new and used parts for trucks from 1947 and on. Help support his business by making your next truck parts purchase there. Our other sponser is Tracy Focht and Kicker audio products. WWW.KICKER.COM. A big thanks to all the sponsers, prizes sure made this event alot more fun! The pictures on this site may take a while to load but they are all worth it! E-Mail me from this link to tell me what you think of the site. Next years show should be held in June with even more trucks, faster loading and more prizes!. Stay tuned to this site and the message board for info. Thank You for stopping by, look around and Enjoy your visit! Merry Christmas! Thanks. Jesse Smith
Unfinished Class
This is Damon Duehring's '69 C10 with a 350V-8. He's in Olathe, KS. Nice and Clean, a good start to a progect..
#1
This is My own truck. I'm Jesse Smith. It's a 1967 Custom C-10 with a 250 six and a three on the tree. It was my uncle's truck before it was mine and my grandfather's before that so I know alot of the history. Its all original except for a new seat, new mirrors and a few little things. It has 115,000 miles and runs great. You can see more about it on my site, www.oocities.org/chevy67jesse
#2
Here's Matt Christiansen's 1969 GMC daily driver. It's on a 1983 Suburban 3/4ton chassis, with a 1995 Chevy TBI 350, AC, OD Auto, Flowmasters, and fresh paint. He's from Houston, Texas. Nice Truck!
#3
This is Mark Scott's 69 C-20 4X4. It has a 307 power plant with a 3 on the tree tranny, dana 60 rear and dana 44 front both with 4:56 gears, new drive shafts and brake lines. It has the NP205 transfer case with a PTO output. [Also has the manual throttle control] The lift that mark is just finishing was purchased from www.offroaddesign.com. It uses new 4" springs in the front and a Shackle Flip bracket in the rear. The shocks are Tuff Country SX8000's and he replaced the tired steering stabalizer with a Rancho RS5000. For tires he went with Super Swamper SSR's, 35 x 12.50 x 16 on black and chrome steel wheels. Mark wants to add power steering, a flat bed, new paint and mabey a 383. Cool! What a great upgrade!
#4
This is Richard Pugh's Truck. It is an original Georgia truck. It is a 72 with 83,000 miles. It has a 4/6 drop with a trackbar kit all from Early Classic. He is now redoing the brakes and is getting ready to install a 700r4 tranny, redo the interior in grey tweed, convert the bed to wood floor, install a tach dash and a tilt column. I can't wait untill your finished!
#5
#6
This is Cory MacLeod's 1970 Chevrolet C-10 from Vancouver B.C. It has a 350ci small-block, SM 465 (4-speed) tranny and a posi 4.10 differential. For wheels He has BFGoodrich Comp T/A 275/60/15 mounted on 15x7.5 rims. He is currently doing the bodywork and future plans include a M22 Muncie transmission, front swaybar and many other things.
http://www.oocities.org/chevroletc1070/
#7
Here is Mike Banks' 1967 c-10. It has a 292 with a 3 speed converted to the floor. It has a wood bed, manual drums, and manual steering. A great place to start.
#8
This is Greg Toney's '72 C10. It has a 250 six and a three on the tree. It was his grandfather's truck and he slowly bringing it back to it's original glory! It just turned 98,000 miles. Gred has lots of little things he wants to do but he says that it doesn't need much. It's a daily driver too. Sounds like my truck but I have a lot of stuff to do! Nice Truck! http://chevytrucks.freewebsites.com
#9
This is Carl Sluder's 1970 c-10 lwb. He purchased it in June of last year from out in a field, grown up in weeds. It had no engine or trans but it now has a 350 4 bolt main fully rebuilt with a crane cam, a high-rise intake, a 600 holley, accel electronic ignition and a 3 speed on the floor. He still has a lot of body work to do and he would like to put a newer model front axle for disc and power brakes and power steering. Looks great already!
#10
Here is Todd Allen's 1972 Cheyenne Super Custom Camper Longhorn. Todd is from Oahu Hawaii. His truck has tilt, a tach, ac, a bed stowage box and a.402 with 80k original miles. It also has a wood bed, sliding rear window, and other options. Since thes pics Todd has removed the big mirrors, welded the non-factory camper boxes on the bed closed, removed all the ruber for replacement and installed new cab Bushings. It is also stripped and ready for paint. Todd sure has a nice truck to start with!
This is Dave's 71 1/2 ton cheynne. It's a 2wd with a 350/350 (was a 4 speed) with power steering and brakes, AC and tach. A tilt and throttle control are making there way into the truck also.It also has the duel "travelers tanks". The urine yellow color was a special ordered and and the pin stripe is factory. The rear springs have the helper airbag in them and also has the helper leafspring. The bronze colored ash tray came from Dave's first truck that he had when he was 16. The truck was wrecked so he saved the ash tray vowing to get a 2nd truck to put it into. Nice truck Dave! http://www.oocities.org/mtdave2u
#11
#12
This is Buzz Holtman's 72 cheyenne super. It has a Jasper racing motor in it. Buzz says it has a lot of rust in the cab and the frame is bent but he has another frame, the bed is perfect and I'm sure he'll fix up the cab. It also has tilt and a tach. Should be a nice truck. Can't wait to see it finished!
