• Acetal, 40% long glass fiber reinforced.
• Acetal, homopolymer, 21% PTFE filled.
• Acetal, copolymer, 2 - 20% PTFE filled.
• Acetal, homopolymer, 1.5% PTFE filled.
• Acetal, homopolymer, chemically lubricated.
• Acetal, homopolymer, UV stabilized.
• Acetal, homopolymer, UV stabilized, 20% glass filled.
• Acetal, homopolymer, extrusion grade.
• Acetal, 30% carbon fiber, EMI shielding (conductive).
• Acetal, copolymer, 10% PAN carbon fiber, 10% PTFE filled, EMI shielding (conductive).
Polyacrylates (Acrylic)
It is a thermoplastic polymer that is commonly used in molding and extrusion compounds.
• Acrylic, cast sheet.
• Acrylic, coated sheet.
• Acrylic, alloy, acrylic / PC, molding and extrusion compounds.
• Acrylic, polymethylmethacrylate, PMMA, molding and extrusion compounds.
• Acrylic, copolymer, MMA / styrene, molding and extrusion compounds.
• Acrylic, impact modified, molding and extrusion compounds.
• Acrylic, molding and extrusion compounds, heat resistant.
• Acrylic, multipolymer, molding and extrusion compounds.
Polyacrylonitrile (PAN or Acrylonitrile)
It is a thermoplastic that is commonly used in extrusion and injection molding compounds.
• Acrylonitrile, extrusion.
• Acrylonitrile, extrusion, high-impact.
• Acrylonitrile, injection.
Polyamide (PA or Nylon)
It is a thermoplastic polycondensate Used to make high-lubricity parts such as bearings. It has high lubricity and moderate strength. It is tough, inexpensive, and has poor dimensional stability due to water absorption.
• Polyamide, nylon alloys, ceramic and glass fiber reinforced.
• Polyamide, nylon (PA 6), molding and extrusion compound.
• Polyamide, nylon (PA 6), 15%, 25%, 30-35%, 50% glass fiber reinforced.
• Polyamide, nylon (PA 6), 30%, 40%, 50% long glass fiber reinforced.
• Polyamide, nylon (PA 6), semi-aromatic semicrystalline copolymer, 35% & 45% glass fiber reinforced.
• Polyamide, nylon (PA 6), unreinforced, toughened.
• Polyamide, nylon (PA 6), 33% glass fiber reinforced, toughened.
• Polyamide, nylon (PA 6), 30% glass fiber reinforced, flame-retardant grade.
• Polyamide, nylon (PA 6), 40% mineral and glass fiber reinforced.
• Polyamide, nylon (PA 6), 40% mineral reinforced.
• Polyamide, nylon (PA 6), High impact copolymers and rubber modified compounds.
• Polyamide, nylon (PA 6), unfilled with molybdenum disulfide.
• Polyamide, nylon (PA 6), 30% glass fiber reinforced, impact modified.
• Polyamide, nylon (PA 6), 30% PAN carbon fiber, EMI shielding (conductive).
• Polyamide, nylon (PA 6), cast.
• Polyamide, nylon (PA 6), cast, heat stabilized.
• Polyamide, nylon (PA 6), cast, oil filled.
• Polyamide, nylon (PA 6), cast, plasticized.
• Polyamide, nylon (PA 6), cast, Type 6 / 612 blend.
• Polyamide, nylon (PA 66), molding compound.
• Polyamide, nylon (PA 66), 13% glass fiber reinforced, heat-stablized.
• Polyamide, nylon (PA 66), 15%, 30-30%, 50% glass fiber reinforced.
• Polyamide, nylon (PA 66), 30%, 40%, 50%, 60% long glass fiber reinforced.
• Polyamide, nylon (PA 66), unreinforced, toughened.
• Polyamide, nylon (PA 66), 15-33% glass fiber reinforced, toughened.
• Polyamide, nylon (PA 66), 25-30% mineral filled, modified high-impact.
• Polyamide, nylon (PA 66), unreinforced, flame-retardant grade.
• Polyamide, nylon (PA 66), 20-25% glass fiber reinforced, flame-retardant grade.
• Polyamide, nylon (PA 66), 40% glass and mineral reinforced.
• Polyamide, nylon (PA 66), 40-45% mineral filled.
• Polyamide, nylon (PA 66), 30% graphite or PAN carbon fiber.
• Polyamide, nylon (PA 66), 40% aluminum flake, EMI shielding (conductive).
• Polyamide, nylon (PA 66), 5%, 6%, 10% stainless steel, long fiber, EMI shielding (conductive).
• Polyamide, nylon (PA 66), 50% PAN carbon fiber, EMI shielding (conductive).
• Polyamide, nylon (PA 66), 30% & 40% pitch carbon fiber, EMI shielding (conductive).
• Polyamide, nylon (PA 66), 15% & 40% nickel coated carbon fiber, EMI shielding (conductive).
Section I: Introduction
Section II: Present (YOU ARE CURRENTLY IN THIS SECTION)
Section III: Future
Complete Table of Contents
Reference