key
DIGIWAVE:6800/7000/7200S;MULTISAT:MS100/2500;X-DREAM

We need computer and data cable this time! Please PRINT this instruction and follow this instruction, you can get it !  [2005-12-20]

How to enter new keys to your COOLTEC receiver(2005/12/20)

Power on your receiver and goto any channel
Press 8282, then go into "Key edit" Menu

Go down to " CAS " button, then press "vol" button on your remote to find " Nagravision" (If you have seen "Nagravision" on your screen, then you don't need to press "vol" button)
Go down to "Ident" button, and make sure you find "Dish Network (0001)" on right.
Go down to "20" and "21" replace new keys , total 32 bit keys, so each line has 16bit keys.

New keys:
"20": 3D731922275DC2C9
"21": 97965A0CA57927F9

10: AF 0C BD 48 D8 51 6D DC
11: FE 44 D6 0C A3 6E 59 42

Then exit, and save keys!
Exit, exit and enjoy!

We don't need computer and data cable this time! Please PRINT this instruction and follow this instruction, you can get it !  [2005-12-20]

KEY00:AF0CBD48D8516DDC KEY01:FE44D60CA36E5942;

PANSAT 2300A/2500A/2700A; PANTEC;SMARTWAVE; EAGLESTAR; FANSAT; ARIZA700

->Press "Menu" on remote
->Go down to " Parental Centrol" & Click "OK" on remote
->Go down to "Second Pin" & Press "0000" in your remote, and you can go into "CAS SYSTEM" menu,
  If your STB is Ariza 700, just press"i2004" in your remote;
->Go down to "Nagravision" & select "OK" on remote
->Using the arrow keys on your remote(volume up) scroll until you see "Dish Network"
->Go down to "Key number" & using the "volume up key" press twice, you will now notice on the top left
  corner of the screen "Negravision2" and your "Key number" should be "00"
->Using your remote, channel down button, select "Key data" on the menu & enter the new keys for key 00.
  Then press "OK" on remote to store(the button "ok/store" will flash)
->Go back to "Key number" on menu & press "Volume up" once on remote (it will be "01"). Make sure on your
  top left hand corner of the screen is still " Negravision2"
->Using your remote, channel down button, select "Key data" on the menu & enter the new keys for key 01.
  Then press "OK" on remote to store(the button "ok/store" will flash)
->Press "EXIT" on remote, Go down to "Key EMU", press "right" button or "Volum" button to make "Key EMU" is "ON"
->Press "exit, exit,exit" and enjoy!
->New keys: 2005/12/06
->key00: AF0CBD48D8516DDC
->key01: FE44D60CA36E5942
Note: If you can't find "NAGARVATION 2" sometime, you go to menu-->parental control-->"0000"-->set default key and go back do it again!

所有PANTEC,PANSAT克隆, 改key方法,中文说明12/20/2005 必须通过打印机用黑白色打印出来!!!

我们不需要电脑和数据线! 打开接收机,用你的遥控面对电视
请按如下方法操作遥控器:
1. 按"MENU"键
2. 按向下键,选"Parent Control",按"OK"
3. 按向下键,到"Second PIN",输入"0000"
4. 按向下键,到"Set Defult key",按"OK"
5. 按向上键,到"Nagravision",按"OK"
6. 在第一行 "Provider ID" 按向右键,到数字上显示"DishNetwork"
7. 按向下键,到"Key Number",再按向右键直到看到这里数字是"00",屏幕左上方变成"Nagravision2"
8. 按向下键,到"Key Data" 输入新Key:AF0CBD48D8516DDC,输完按"OK"
9. 按向上键,到"Key Number",再按向右键到这里数字是"01",屏幕左上还是"Nagravision2"
10. 按向下键,到"Key Data" 输入新Key:FE44D60CA36E5942,输完按"OK"
11. 按"EXIT"5次,看节目,如不行,拔掉电源过3秒重新插上.