| ================== Trigger Stick Dimensions ================== Here are the dimensions for the "Trigger Stick". "Place the Trigger Stick through fork (looks like large needle eye) with straight edge down. Insert end of stick in the opening in the center of lower rear frame of loom and fasten with pin (bolt). Have other end resting on the stirrup / anchor." W.D.Loom Manual A short carriage bolt is used on one end as marked on print. The round head rides along the bottom of the stirrup / anchor. It is used to prevent the wood from wearing away when the trigger stick slides back and forth along the stirrup. http://www.oocities.org/wdloom |
 |
 |
 |