The time zone on my receiver is all wrong, how do I set it back to normal?

After programming a card with Betty & Christina software
just insert the card into your receiver and then MAKE SURE to
unplug your receiver for 10 seconds and then plug it back in to clear the
garbage data left in the receiver from the shutdown. If you do not do this
then you will probably continue to see the same "Call ext. 745" message on
your screen. Now this is all you need to know UNLESS you have a RCA receiver
that has multi-user capability. If you do then you will need to immediately
go into your SPENDING LIMIT menu and set your time-zone code in the FAMILY
user position. Time-zone codes are as follows:

PST = 410
MST = 415
CST = 420
EST = 425
AST = 431
NFLD = 433

After doing this you should unplug your receiver for 10 seconds and plug
it back in because if you don't you will probably see a shutdown message
appear on your screen. But don't worry. If it happens just unplug your
receiver and plug it back in and the video will come back. If you have
any other brand of receiver or an RCA without the multi-user
capability (Usually the older ones) then none of that procedure is needed
because your time-zone code will be set automatically to the default you
selected when programming the card.


YOU SHOULD NOW BE BACK UP AND RUNNING AND YOUR TIME SHOULD BE CORRECT



Questions email to Dragon's Landing.