How do I take a good working image off a card and transfer it to another card with my unlooper?

 

1-Open your Wild Thing 3.0 software.

2-On the main window under mode, click read card.

3-Insert the good card you want to copy.

4-When it has finished reading the card, it will ask you for a place to save the good bin image.  Put it somewhere and REMEMBER where you put it. 

5-In order to use the bin image you just saved, you will need to download the WBIN2IMG.EXE from here

6 -Open wbin2img.exe, type the name of the .bin file you just saved with the WildThing 3.0 software in the "input file" box.  

7-In the "description" box, type in what you would like to be displayed in the action line of WildThing 3.0, ie "good card from Paul".  

8-Now check the box that says "create a img-clone" -now click convert, and wbin2img.exe will create a clone image for you. 

9-wbin2img.exe will automaticly save the img's with the same name you origionaly called the saved bin , if you read the card in WildThing 3.0 software and you saved the file as "goodfile.bin" then wbin2img.exe will save it as "goodfile.img". 

10-Now close wbin2img, and follow the steps in questions 3 of this faq to assign the image you just created to your button in the WildThing 3.0 software.

Questions email to Dragon's Landing.