JYTurbo Parts List: Cost: 2 .63 A/R T03 Turbochargers (one from a 85 Thunderbird turbo coupe and the other is off of a 86 Mustang SVO) $175.00 1 Set of Flowtech 1 5/8's Shorty headers (New) $130.00 3 Foot of 2.5 inch pipe (connects the header to the turbo) $15.00 2 T03 turbo exuast flanges (homemade) $0.00 2 T03 turbo exuast flange gaskets (homemade) $0.00 2 90 deg electrical conduit pieces ((plumbing) one on each compressor side of the turbo) $18.00 1 6 foot stick of 2 inch conduit pipe (more compressor side plumbing) $12.00 1 Flowmaster 2 into one (two 2.5 inch input to one 3" output this ties the turbo's together) $45.00 Misc Silicone hose and clamps $30.00 3" mandrel bend pipe for intake plumbing (purchased a box FULL at the local semi junkyard) $25.00 Total Cost of the homemade JY Twin Turbo kit $450.00 Other parts needed for this project: 75 Pro M mass air meter and 8 36psi injectors (used) $300.00 255 Walbro intake pump $90.00 Total of other needed parts $390.00 Optional parts on this Motor: TFS-R intake $450.00 F303 Cam $120.00 Edelbrock 6037 heads 1.90 intake 160 exuast valves $950.00 Adj. Fuel pressure Reg. $ 45.00 Just a note: Stock fuel rails Stock Throttle body Stock Valvetrane Stock bottom end with 140k miles (I did replace the crank with a remain autozone crank) Stock suspension Performance to date 7.02@104.60mph 1/8 should be good for high 10's@130mph in the 1/4 |