BASE MODEL: NormalSkin color: 5, C(-85,-19), S(10)


BASE EDIT

1.)Skin 8

2.) Cheeks/ Face edit : 13, Face Model: 11
eyebrows(1,-33)
eyes(-35,-20),(-24,12)
Nose(48,19),(10,4)
Mouth(14,28)
Jaw(64,32),(32)

3.)eyes: 10, C(-5,-12)

4.)Eyebrows: 24, T(57), C(-90, 0), S(-1)

5.)Hair:44, C(-71,100),S(-12)

6.)Underwear: 6, Blank :1, C(-71,100), S(-7)

7.)Face accessories: 56, C(-87,-1), S(3)

8.)Design>Face>Simple Patterns> 166> reduce 3* , T(-18), C(21,-17), 
S(-58) place this at the right end of left eyebrow this is to extend the left 
eyebrow so that it looks even compared to the right eyebrow

9.)Designs>Face>Letters>Sign> page 1> 4th coloumn, 4th row, reduce 3
 times, C(-76,-87)place at the left end of lips this is to extend the smile a 
little

10.) Design>Face>Simple Patterns> 135> reduce 3*, T(-70), C(-92,-16) 
place this below the lips this is the little dimple on chin

11.) Designs>Face> Letters>Sign>First coloumn , 5th row, reduce 1*, 
rotate 3*, T(-62),C(-80,-100) place under left eye leave a little gap , this 
form the outline of the bag/ wrinkle under the eyes

12) Designs>Face> Letters>Sign>First coloumn , 5th row, reduce 1*, 
rotate 3*, T(-62),C(-80,-100) place under right eye leave a little gap , this 
form the outline of the bag/ wrinkle under the eyes

Now we make his facial hair refer to help PICS at all times , Play around to
 make it look like the pics above. The pics tell you what I am doing here 
with the facial hair. They give a outline of whats to come

13)Design>Face> Patterns > WWE Pattern: 42, reduce 1 and rotate 2, 
C(-78,100), S(-20) place under the nose leave a little gap see pics above

14) Design>Face> Patterns > WWE Pattern: 42, reduce 2*, rotate 2*, 
C(-86, 85), S(26) place so that it slight overlaps the previous facial hair but
 slighty

15.) Design>Face> Patterns > WWE Pattern: 42, reduce 1 and rotate 2*, 
C(-78,100), S(-20) place abit under and overlapping the first pattern in this
 sequence see pics**Now we begin a series of smaller WWE Patterns 42
 to make it look like a moustache

16.) Design>Face> Patterns > WWE Pattern: 42, reduce 3* , C(-71,100), 
S(-20) place at left of the big pattern 42, theres 2 here so attach this in 
between the previous pattern 42's as to to extend the moustache a little 
see PICS

17.) Design> Face>Patterns > WWE Pattern: 42, reduce 3* , C(-71,100), 
S(-20), place above previous

18.) Design>Face> Patterns > WWE Pattern: 42, reduce 3* , C(-78,100), 
S(-20) place to cover up the gap a little on right hand side where the two
 big patterns 42' s overlapp each other SEE PICS

19.) Design> Face>Patterns > WWE Pattern: 42, reduce 3* ,rotate 1*, 
C(-78,100), S(-20) place this at the right of the big pattern 42's

20.) Design>Face> Patterns > WWE Pattern: 42, reduce 3* , C(-78,100), 
S(-20) place tomake facial hair thicker now on right hand side
**Now the mousctache is formed but we need to make it bigger and the 
vertical pieces attached to either side**

21.) Design>Face> Patterns > WWE Pattern: 42, reduce 1*, rotate 1*, 
C(-71,100), S(-20) place very close to the left hand of the now formed 
mostache. We are going to form the facial hair extend downwards at 
either side

22.) Design> Face>Patterns > WWE Pattern: 42, reduce 1*, rotate 1*, 
C(-71,100), S(-20) place very close to the now formed right hand of 
moustache 
We are going to form the facial hair extend downwards at either side

23.) Design> Face>Patterns > WWE Pattern: 42, reduce 3*, rotate 1*, 
C(-71,100), S(-20) place to thicken the top of edge of previous piece

28.) Designs>Face> Simple pattern: 11> C(-70,62),S(-57) place on back
 of hair leave a little sticking out see pic

29.) Designs>Face> Simple pattern: 11> C(-70,64),S(-51) place to overlap
 previous at back and move it over a bit

30.) Designs>Face> Simple pattern: 11> C(-70,48),S(-51) place to overlap
 layers 28 , 29, 30

31.)Designs>Face>Simple pattern: 15, rotate 2* , C(-74,82), S(-61) place 
a little below the where layer 29 was to make it thicker
NOTE: the above patterns form like a block of hair in the middle of the 
neck at the back Now I extend the hair at either side of this

32.) Designs>Face>Simple pattern: 15, rotate 2* , C(-67,80), S(-66) place
 so that it extends the left hand side of the previous layers. Basically 
extending the back hair to make it go around the neck more

33.) Designs>Face>Simple pattern: 15, rotate 2* , C(-67,80), S(-66) place
 so that sits on top of layers 32 and 33

34)Designs>Face>Simple pattern: 14, rotate 1*, C(-70,66), S(-68) place 
so that it overlaps previous pattern and move it so it kinda connects with 
previous pattern

35.) Designs>Face>Simple pattern: 15, rotate 1* , C(-73,82), S(-59) same
 as layer 33 but on the right hand side

36.) Designs>Face>Simple pattern: 15, rotate 18, C(-73,87), S(-66) place
 it so that it interconnects with previous peice

37.) Designs>Face> Simple pattern: 11> C(-70,62),S(-57) placement 
wise same as layer 30

38.)arms- wristbands>blank>1, L(-71), C(-68,-48), S(-7)

39.)Legs>Kneepads> Blank: 1, C(100,11)

40.)Feet>Shoes>Blank>10, L(-52),C(-70,38), (-17)



Figures:Form

Head(-12),(79)
Neck(-8,-45),(68)
Chest (-2, 31)
Shoulder (-79,-19)
Abdomen(12,-29), (49)
Arms (5,33) , (-60)
Forearms (-12,-9) ,(-100)
Hands (-89,-12) , (-39)
Waist(15,15)
Thigh(7,12), (51)
Legs (-5,-12), (-73)
Ankles (-47,-36)
Height : 6' 9"