Building a Jumbo Walkalong Glider
(50" Wingspan) Continued
A nice view of our slowest, lightest, glider, gliding free.
The completed Jumbo gilder with a Z-Surfer (12" wingspan, below) and Wind Rider for scale.

Instructions for trimming the glider for flight
Notes on flying walkalong gliders
Advanced Flight Technique
Photo of jumbo in flight from ailerons episode available for viewing on community cable TV

video of jumbo flight
video of
jumbo flight- short straight and level, crash into wall
video of jumbo flight- 1.5 times around the room through 3 wind shear events

Photos of jumbo in flight


Back to home page
The wings are taped together on the bottom surface fore and aft and the top surface midpoint. Ballast is taped to the nose, protruding forward so less mass can be used to create the same moment (mass X distance from Center of Gravity) as a heavier mass closer to the Center of Gravity. I used two nails for a total weight of 15.6 grams. A chunk of styrofoam on the nail heads minimizes damage during crashes. The tape is placed such that the ballast can be adjusted fore and aft. The completed plane weighs 56 grams.