 |
 |
 |
 |
 |
| Rear Suspension adjustable "Limiting Strap" i thought along time about building a brace that went between the frame rails, (but got lazy and just bolted the 18" long 1/4" thick flat stock to the body.) i'm using an adjustable strap because i had it and figure it will come in handy when using a Hi-Lift jack :) pretty simple, pictures show it all, So do you think it will hold? we'll see. back to 3/4tonYJ' main page |
 |
 |
 |
| "Limiting Straps" and "Bumps Stops" I didn't really want these, they were installed to minimize problems and breakage. I worked for awhile to get good flexing leaf springs and now there is alittle to much. i've flipped the front shackles back up against the frame a few times, my 6" front driveshaft shaft stub and slider comes apart during steep climbs and i don't want to max out my rear CV driveshaft. |
 |
| Above: these shackle straps are prettys straight forward, i did space them out away from the shackle/frame and use double nuts so that they can rotate freely Below: this long red strap in to limit droop of the drivers side front shock. this along with the shackle strap keep my front driveshaft from coming apart :) |
|
 |
 |