My 10 MM Handloads (Nuclear!)
THESE LOADS WERE CREATED UNDER
CONTROLLED CONDITIONS.
DO NOT ASSUME THEY WILL NOT BE
OVER PRESSURE IN YOUR GUN!
ALWAYS REDUCE THE LOAD BY 15%
AND WORK UP IN YOUR GUN!
I TAKE NO RESPONSIBILITY FOR
THESE LOADS OR ANY TYPO ERRORS!
ONLY YOU CAN TAKE RESPONSIBILITY
FOR YOUR LOADS!
LOADS WITH AN * ARE OVER BOOK
MAX OR ARE NOT LISTED!
MOST LOADS ARE BOOK MAX, SOME
ARE OVER!
NO OVER PRESSURE SIGNS WERE NOTED
IN MY GLOCK G20.
MY S&W 1006 WILL SHOW SOME
OVER PRESSURE SIGNS WITH THE LISTED LOADS.
USE WITH CAUTION!
All loads were shot out of my
G20 with a Glock 6" barrel, and 22 # recoil spring.
If you are going to load your
10 MM hot, buy a heavy recoil spring!
My stock G20 barrel gives me
about 100 fps less velocity.
My S&W 1006 will give about
50 FPS less in velocity.
All loads were using CCI 350
Large Pistol Magnum Primers, and using new brass.
Do not use with used brass!
Most loads were listed in Lee's
Modern Reloading. Please use a good manual as a guide.
I know that most reloading manuals
do not list such high loads.
Pressure signs of even the hottest
load listed are less the other powders(at max) giving lower velocities!
These loads were listed by IMR
and by Lee. Some are max, or self- worked up loads.
800-X stands for IMR Hi-Skor
800-X. IF YOU WOULD LIKE TO CHECK THESE WITH
THE LOADS LISTED IN LEE'S MODERN
RELOADING FOLLOW THIS LINK!
LEE'S
MODERN RELOADING IT IS IN THE UPPER LEFT CORNER (BEST PRICE I HAVE FOUND)