This “congratulations” message was sent all the way up to the CIO. Notice that John Wotherspoon sent it to all the developers. Also note that the originator of the message – Rodney Roy from Atlanta – mentioned my name explicitly. I was also one of the 3 developers assigned to this project (the “TIBCo Simulator”, as he called it).
--------------------------------------------------------------------------------------------------------------------------
From:	Wotherspoon, John (CRTRES)
Sent:	Tuesday, January 16, 2001 8:39 AM
To:	Davy, Robin (CRTRES); Hau, Bob (CRTRES); Hogan, Patrick (CRTRES); Komarraju, Aparna (CRTRES); Leong, Edwin (CRTRES); Ngo, Kim (CRTRES); Sabin, Timothy (CRTRES); Xia, Bo (CRTRES); Yue, J.C. (CRTRES); Yue, JZ (CRTRES)
Subject:	FW: TIBCo Simulation Success
Although we view these deliverables as part of our "job", they are having a direct positive impact on Concert's development community.

Great work!!!

John A. Wotherspoon
Concert 
EAI Development
703-262-1512

 -----Original Message-----
From: 	Sherburne, John (CRTRES)  
Sent:	Monday, January 15, 2001 3:12 PM
To:	Wotherspoon, John (CRTRES)
Subject:	FW: TIBCo Simulation Success

Good work again, John.

John

-----Original Message-----
From:	Beurmann, Michael  (CRTRES) 
Sent:	Monday, January 15, 2001 9:13 AM
To:	Sherburne, John (CRTRES)
Cc:	Russo, Dino (CRTRES); Consiglio, Mike (CRTATL)
Subject:	FW: TIBCo Simulation Success

John,  

Thanks to you and your team for supporting this effort!  We are making excellent progress.

Mike Beurmann
Concert Network Management Systems
01-703-755-6327 (Office)
01-703-989-8947 (Mobile)

-----Original Message-----
From:	Roy, Rodney (CRTUSW) 
Sent:	Saturday, January 13, 2001 5:48 PM
To:	Beurmann, Michael  (CRTRES); Danielson, Angela (CRTATL)
Cc:	Srinivasa, Vijay (CRTATL)
Subject:	TIBCo Simulation Success

Mike,

Please let John Sherburne know that we have worked with his team to successfully send and receive messages from our prototype to the TIBCo simulator.  Tim Sabin from John Wotherspoon's team was our point of contact.  Once the simulator was received it took only about 2 days to complete the prototyping.  We finished on January 10th.

We are now working with Chris Williamson to complete the feasibility and prototyping "full circle" between CAMS and CTMS.

Thanks,
Rod