 |
 |
 |
| Body Construction |
 |
 |
 |
 |
| The sides are cut from 1/2" exterior plywood the pattern for the Benroy came from Grant at Lil Bear. The window is from Home Depo. |
| The sides are held in place with stainles steel screws and Liquid nails the bows are made of oak, the front bend was done first using straps to clamp it down. |
| The first layer of the roof is on it is covered with 1/8" oak plywood all holes are filled with water puty and sanded it is now ready for the outer skin. |
| The final roof covering is on stained and sealed |
| The sides are now covered with 1/8" oak plywood and stained with Minwax red mahogany then sealed with minwax Helmsan spar urethane. |
| The trim is cut from white oak and sealed with Helmsman Spar Urethane |