Jerry,
The postwar 4-4 had a Moss box (1947-50).  The +4 had a Moss box
(1950-1969).  Early +8's had a Mosss box.  If you need a transmission
for a Cortina engined 4/4, the German Ford transmission is much stronger
than the English one.  The German box was in 1974 Pintos with the 1600cc
engine.  The German box has 10 screws on the top cover, the English one
4 screws.  The German box used to cost about $75 at the scrapyard, the
English box about $250!  On the same subject Moss boxes are made of
unobtainium and $1500 might be the price.
Regards, Tony
--------------------------------------------------------
Morganeers:
I am desperate.....  I have a throwout bearing on the way. Question does
anyone have a picture of the linkage between the throwout bearing and the
fork? It consists of a "D" ring made out of spring steel and a couple of
circular wire clips. I am getting the clips but I will probably have to
fabricate the "D" ring out of spring steel.


Farley,


   Have you tried calling Dave Bean Engineering in CA.:


    Dave Bean Engineering Inc.,       Ford performance engine parts.  Great
     636 East St. Charles St.             information on the engine and
Trans-
     Star Route 2                               mission. Fantastic
catalogues  for
     San Andreas, Ca. 95249            $10
        (209)  754-5802              


John