How To Specify A NIC's Settings To LILO: At the LILO prompt, enter a line like the following: linux ether=10,0x300,eth0 (Where 10 is the card's IRQ, 300 is the I/O address, and eth0 is the device name)
How To Specify A NIC's Settings To LILO: At the LILO prompt, enter a line like the following: linux ether=10,0x300,eth0 (Where 10 is the card's IRQ, 300 is the I/O address, and eth0 is the device name)
|
|
|
|
|