Horn with Thickness Morph Target |
||
![]() |
This Prop was originally created for a specific request
for a horn for a Poser Model. The original model was much thicker at the
base, and so was requested to make it a little thinner and longer. This
is the finished Prop, which was made much thinner but includes a Morph
dial for Thickness.
There are three separate texture sections included. One for the basic Horn shape, a second for the ridges up the front, and a third for the two outer ridges that bound the center bumps. The Poser Prop (180K) The Prop contains both the right and the left horns. They will appear slightly above the head, then you can reposition them to fit the particular person/head you are using. Unzip into the main Poser directory, and it will create the necessary DMesh folder(s) in the Geometry and Props directories. The DMesh Files (2K) (It's true! Don't blink, or you'll be forced to dl it a second time just to be sure!) |
Shields and Dagger |
|
![]() |
A shield prop. There is a back plate that could be colored with a wood texture, or in this case a procedural painting. There is also center spike and two metal rings. The five ribs hold the whole thing together. |
![]() |
The same shield with some additional details. Note the ridges on the outer and middle rings. These were created by simply increasing the repeat value for the height curve. In this case, the repeat value was set at fifteen to provide a number 'spikes' to these two rings. |
![]() |
The Shaken Shield. A similar variant on the above shield. The back
plate and outer rings were removed, and the center spike was rounded. The
ribs were then 'sharpened' and curved a bit.
|
![]() |
The Dagger. |
Download the DMesh models (4K) It didn't really seem worth it to make a separate zip for every model, so the three shields and the dagger are all in the same zip. |
Coming soon... Horns, legs, armor... You tell me...