
|
 |

|
 |
Empty video tape cover |
finished book box |
 |
 |
layout of cardboard pieces |
masking taped pieces |
 |
 |
outside cover |
inside view of cover |
 |
 |
finished inside view |
covered video tape cover |
 |
 |
finished book box, open |
book box covered with contact paper |
 |
 |
double video cover book box |
inside view of double book box |
|
Materials
1 cardboard video box
piece of heavy card board
wrapping paper or contact paper
masking tape
glue
Instructions
- cut the cardboard into 3 piece, the front, the back and the
spine. The front and the back are the same size 4¾x8 inches.
Round out 2 corners by placing a penny over them and tracing it,
then cut it out. The spine is 1x8 inches.
- Now lay the cardboard pieces on the table with a gap of at least
the thickness of the cardboard between the piece.
- Tape the pieces together with strips of masking tape on both
sides.
Now place that piece on your wrapping paper and cut the wrapping
paper 1-inch larger than the cardboard.
- Spread an even coat of glue on the cardboard and place on wrapping
paper and smooth out.
- Make slits in the corner of the wrapping paper to make it fit
around the rounded edges and apply glue to the wrapping paper
and fold down over the cardboard.
- Next cut a piece of wrapping paper 7¾x8-inches and glue
it onto the inside. It will cover one half fully and the second
half partially.
Now cover the video tape cover on the front and sides only. The
back is not totally covered as it is not seen.
- Then glue the covered box, opening toward the spine, centered
onto the cover you just made.
Variation
- I glued 2 video tape covers together and then covered them to
make a dual book box. The width of the spine has to be adjusted
here to 2-inches.
|
|