|
|
|
|---|
DECEMBER 2006 |
< PREVIOUS > | < NEXT > |
 |
 |
 |
| 17-Dic-2006: Re-starting the construction and due rain, I began to cut plywood to make me a Dinghy. | 17-Dic-2006: Beginning the assembly by stitch and glue method. |
17-Dic-2006: Placing the bottom. This model of Dinghy is a modified D5, since alter the scale to make it with a single plywood sheet. |
 |
 |
 |
| 18-Dic-2006: View of bottom. | 18-Dic-2006: Fillets ready. |
18-Dic-2006: Edges fiberglassed with epoxi and cloth. |
 |
 |
 |
| 20-Dic-2006: Almost finished the structure, only rest the cover of central seat. | 20-Dic-2006: At same time placed the estructure of coamings. |
20-Dic-2006: View of my two boats. |
 |
 |
 |
| 20-Dic-2006: After sanding lightly, I begin deck fiberglassing with 2 layers of cloth 450 gr/m2 and epoxi (lot epoxi!). in this picture the forward is ready. | 23-Dic-2006: Finally the "Little Sirius" (named "very originally" by Flor) is already finished. |
23-Dic-2006: The fiberglassing it's going ahead!.Already finished front and sides of cabin and corridors. Plywood of coaming sides placed. |
 |
 |
 |
| 23-Dic-2006: Front view of fiberglassing. | 25-Dic-2006: After painting it, Flor makes a "buoyancy test" of "Little Sirius", with a quite peculiar oar!!. |
25-Dic-2006: As didn't sink, embarking everybody!. |
|
 |
|
| 26-Dic-2006: Time of roof and cockpit to receive fiberglass. The structure of coamings are ready. | 26-Dic-2006: General sanding of the whole fiberglassed to retire "roughness". Placing the coaming components. |
26-Dic-2006: General view of work. Little by little I go "reopening" the windows and hachts places. |
 |
|
|
| 27-Dic-2006: Finishing the internal face of coamings. Flor is painting the bottom of "Little Sirius". | 27-Dic-2006: Placed the internal face of coamings and opened the hole for winch handles. Cockpit floor fiberglassed. |
27-Dic-2006: Under upper cover of coamings was placed a cedar reinforcement to screw the winch.Sanding to place the closure cover of coaming. |
 |
 |
 |
| 29-Dic-2006: Coaming sanded, rounded and fiberglassed. | 29-Dic-2006: General view of work with both coamings fiberglassed. |
29-Dic-2006: From above can appreciate the zones not fiberglassed yet. |
 |
||
| 30-Dic-2006: Aft room window placed and opened the hole. |
DECEMBER 2006 |
< PREVIOUS > | < NEXT > |