Enkei EUM5
Wheel Sizes & Specs
Size Bolt Pattern Offset Weight (lbs) Centerbore Finish
(diameter in. X width in.) (# of bolts x PCD) (mm) (lbs) (mm)
15 X 6.5 4x100, 4x114.3 35 16 Cast
16 X 7 4x100, 4x114.3 18 Cast
Notes:
-Accepts 21mm 60 degree cone face lugnuts
-The dual drilling holes are quite close to each other, not maximum spacing staggered
-The centre caps are aluminum plates that have six bolts going through it in a hexagonal pattern. Two of the bolts hold the plate to the wheel.
-Bolts that fit the cetre caps well are allen key bolts measruing M4x.070xlength, =>20mm length for the two lock bolts, =<12mm for the remaining 4 bolts. Make sure threads go all the way to the bolt head for the smaller botls.
Enkei EM-10A
Wheel Sizes & Specs
Size Bolt Pattern Offset Weight (lbs) Centerbore Finish
(diameter in. X width in.) (# of bolts x PCD) (mm) (lbs) (mm)
15 X 6.5 4x100 40 Cast
Notes:
-Accepts 21mm 60 degree cone face lugnuts
-Single drilled holes. No pre-drilled holes for futre drilling
-The centre caps are plastic with the Enkei logo and name upon them. It snaps to and only covers the centerbore hole, resulting in exposed lugnuts.
Rays Engineering Gram Lights 57C
Wheel Sizes & Specs
Size Bolt Pattern Offset Weight (lbs) Centerbore Finish
(diameter in. X width in.) (# of bolts x PCD) (mm) (lbs) (mm)
15 X 7 4x100 38 Cast
Notes:
-Accepts 21mm 60 degree cone face lugnuts
-Single drilled holes. No pre-drilled holes for futre drilling
-Centre caps optional, as in no centre caps. :(