1963-66 Rambler Classic
Marlin and Ambassador
Hazard lights [ 4 way flashers ]
The 1963 thru 1966 Classic Marlin and Ambassador use common wire coding and components for the turn signal and brake circuits.
This works to your advantage to install the hazard light [ 4 way flashers ] on to any of these cars.
The BOBKIRK Model 600 was custom wired as a dealer installed option for the 1966 cars, featuring correct colour coding to match the Rambler harnesses.
The unit contains a 14amp fuse and three terminal flasher unit.
Installation is a simple matter of attaching the mounting bracket under the dash [ you will notice the convenience of many pre-drilled holes, so you do not have to butcher your dash ]
and attaching the corresponding coded wires.
Similar non-coded BOBKIRK units without color coding may be utilized, as the unit only feeds a pulse signal into the wires.
The color coding of the Rambler wiring harness is as follows:
- ORANGE rear left turn signal
- WHITE rear right turn signal
- YELLOW front left turn signal and left turn indicator
- BROWN front right turn signal and right turn indicator
The RED wire on the unit goes to the BAT terminal of your ignition switch.
The two remaining wires in the wiring harness are not affected by the modification [BLUE turn signal flasher unit, GREEN stoplight switch].
The flasher modification could also be applied to other earlier Ramblers by decoding the harness for the turn signal wires.