7000_060515 new patch for dragon x 7000 can open cryptworks (mtv on astra) 7200_060515 new patch for dragon x 7200 can open cryptworks (mtv on astra) 9200_060515 new patch for dragon x 9200 can open cryptworks (mtv on astra) 7200_loder Loader for dragon x 7200 only loder Loader for dragon x 7000 and 9200 1. S/W Update 1)Computer---->Receiver without the television a)Prepare a twisted RS232C cable(pin-2 to pin-3,pin-3 to pin-2,pin-5 to pin-5). b)Connect your PC and receiver with twisted RS-232C cable.For safety,you should switch off the computer and the receiver before connection. c)Turn on the receiver and press "POWER" key to make it standby. d)Run the update tool on your PC,Slect the,press and select a .bin file,then click ,upgrade will begin. e)During the updating,the LED will display "dxxx"(Receive the data to the SDRAM),"-ES-"(Erase the flash),then "Pxxx"(Put the date to the flash),at last it will display "-End" f)Tune off the receiver,disconnect twist RS-232C cable and restart it. 2. Patch Enable and Disable Exit all menu, Press F1, the LED will display ¡®H¡¯, then press 000. 3. Patch Code Menu If the patch mode is enabled, go to Main Menu?Timer, in the sub menu, the Key Menu will appears. 4. All ECM View Switch to Scramble channel and in the patch Enable Mode, press PGUP key. 5. Current Key Switch to Scramble channel and in the patch Enable Mode, press PGDN key.