Edge of Chaos System Requirements
See notes below for more information
US & Non-European Release
| Recomended Specifications | Minimum Specifications |
| AMd Athalon, Intel Pentium III or better processor | AMD K6-2 350MHz or Intel Pentium II 300MHz or better processor |
| 128+ MB RAM | 64/128MB RAM |
| 32MB+ 3D Video Card | Microsoft DirectX compatible sound card |
| 16x CD-ROM Drive | 4x CD-ROM Drive |
| 600MB Hard Disk space for installation | 600MB Hard Disk space for installation |
| 128MB Hard Disk space after installation | 128MB Hard Disk space after installation |
| 3-axis, 4 button joystick with 4 way hat switch | |
| 28.8K modem for internet play |
European Release
| Miniumum Specifications |
| Pentium III 400 Mhz Processor or better |
| 64MB RAM |
| 4X CD-ROM |
| Windows 95 or later |
| DirectX8 (included with the game) |
| DirectX Video Card |
| 600 MB Disk Space |
Notes:
The European miniumum specs are of a somewhat higher level than those of the US release. It is my experience that the US minimum specs are acurate enough. However, I found it best to follow Stephen Robertson's advice and get plenty of RAM. I originally had 64MB of RAM but needed to upgrade to 192MB in order to get the game to work. I also had to upgrade my graphics drivers to the most recent available (May 1998, if you happen to have this same card).
The game is running pretty well on my system as it is. There are no sound studders, the gameplay is generally smooth, and the graphics are fine once I turn down the model detail a little bit. Here are my specs:
| 1998 Dell Dimension V333 |
| Intel Pentium II 333MHz processor |
| 192MB RAM |
| 8MB ATI Xpert AGP 2x Video Card with Mach64 Chipset |
| 14-inch diagonal screen |
| Yamaha DS-XG Direct Sound Driver |
| Gravis Black Hawk Digital 3-axis, 4 button joystick with 4-way hat |