TRVLRTXT.jpg (27455 bytes)
God Bless the USA
flagwave.gif (12791 bytes)

cpr_durango_bttn.gif (2673 bytes)HOME cpr_durango_bttn.gif (2673 bytes)MOD'S cpr_durango_bttn.gif (2673 bytes)TRAVELS

flag.gif (1635 bytes)

 

THIRD BRAKE LIGHT MOD [TBL]

This is an easy one and not expensive either.  You need to be aware that using this may get you a rejection if your  state requires annual or biannual inspection.

tbl_mod_oncls.jpg (51952 bytes)

Here it is with brake light   on and off.  I like it both ways.

tbl_mod_off.jpg (51815 bytes)

So now you want it right!

That's easy too.  Just send off an email to DOC member Rick Cherry a rcherry@fotofab.com and he'll give you all the details.  In August of 2001 it went for $12.00.

 

And if you want to see how to install, here's the scoop:

Receive the mod in the mail.  Of note, the dog hair you see in the picture did not come with it!  

tblinstl7.jpg (58202 bytes)

 

Remove the top portion of the tailgate liner.  It just pops off.

Then use an 8mm socket to remove the two screws holding the TBL assembly

tblinstl1.jpg (96213 bytes)
Stick the mod to the brake light with the 3M tape already on it.  

tblinstl3.jpg (113774 bytes)

 

Place a thin line of electrical tape around the edge if you want to keep the red light from shining around the edges.  

tblinstltape.jpg (81762 bytes)

 

Reattach the brake light assembly and pop the liner back on.  Voila - that's it!!

 

Use your BACK button to Return to Exterior Mods