HOME

BADGES

TROPHIES

ENGRAVING

SEARCH

SITE MAP

CONTACT US

POLICY
 
 
 
 

 
HONOURS BOARDS
We have been manufacturing honours boards and maintaining them by adding names as required for the most part of the last 100 years. They are usually made up indvidually as required and there has never been a standard design or specifications put down on paper (or computer).   I have often thought there has got to be a better way.  This would never work for any other product ie. cars, houses, vacuum cleaners or trophies.  We have now come up with a design which meets all the requirements and is still flexible enough to allow for personal preferences.

Below are some examples of this design.  You are not limited to the specifications below but they make a good starting point as we have tested them out.

Specifications:
Size:   600 x 1200 mm  or 1200 x 800 mm or made to your requirements.
Frame:   Silver or other colours to suit.  Sides removable for easy access to the removable panels which slide out.
Heading:   Engraved Logo and/or Company or Club Name etc  into Gold Metalex or similar laminated engraving material.
Names Years etc:   Gold 12mm high Times New Roman text engraved into Black laminate or Black engraving into Gold if preferred.
All supplied assembled to the highest quality.

To help you with the design you may like to  considered the following points...
Wording or Logo for the Main Heading.
Column Headings (wording and quantity required)
Number of years you would like engraved and number of years to allow for the future.
Overall  size, which will be mainly dictated by the above requirements and the size of the engraving.  We can work this out for you.  You may need to consider multiple boards of smaller sizes.

Samples only... Images have had their resolution reduced drastically to facilitate faster downloading.
Acrylic Honours Board
Material: 10mm Clear or Tinted Acrylic
Size: 640 x 900 mm or any size to suit your requirements.
Fittings: Supplied to secure the panel 15 to 20mm out from the wall with removable dome nuts.
Engraving: All engraving in reverse on the back of the panel.  Engraving names 10mm high with black fill. May be engraved larger if panel mounted further away.  Provision for three columns on the sample shown.
Heading: The heading may be a School, Sports Club or Company Logo or Name etc. It will also be engraved into the back and filled with colours to suit.  There may also be column headings as required.